How to route Weber hoses on a MGB?

How to route Weber hoses on a MGB?

Several MGB owners have asked for these photos, so here are a few more pictures of the engine in my 1978 MGB, with an added bonus. the last photo on this page explains how to route the carbon canister hoses on an MGB that has a Weber downdraft carburetor. Vacuum hose routing for the anti run-on valve is shown too.

What kind of carburetor did the MGB use?

This was the carb of choice among factory entries and racers in the heyday of the MGB, and coupled with the reliability inherant in the design, it powered the B to many finishes above more tempermental entries by other sportscar manufacturers of the time.

Is the Weber 45 DCOE a good carburetor?

The Weber 45 DCOE is a popular choice for MGB owners looking to unleash a bit more power in the admittedly rather prosaic (but reliable) B-Series engine.

What should I do with my Weber carburetor?

A steady rod should be made up and connected to the rear engine plate. Your Weber conversion will be most worthwile if you combine it with cylinder head modifications, a free flow exhaust system and a good air filter setup like K&Ns. Tuning is a complex affair and best done on a rolling road.

What kind of carburetor does a Weber MGB use?

My engine is 846F (no overdrive). Moss, this is regarding the Weber 45 DCOE carburetor. A much different kettle of fish to calibrate. Almost everything is able to be swapped out to make the carb run properly for almost any engine that you can mate it up to.

When was carburetor swap Tech Day for MGB?

Carburetor Swap Tech Day 1 Z-S to 2 SU HS4 (March 31, 2001) Carburetor Swap Tech Day 1 Z-S to 2 SU HS4 (May 8, 2004) Carburetor Tuning (CMGBC Dec.89) Fine-Tuning the MGB Carb Needles (Driveline Feb.01)

Are there any spare parts for a MGB?

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo. I have recently returned to my 79 mgb roadster Project after 7 years in Dry storage!!

Can a Weber DGV be installed on a MGB?

While that may sound quite technical, it is actually very simple, once someone else (me) has done the brain work. When installed on an MGB, DGVs are notorious for an off-idle “stumble” or “dead spot” and a slight hesitation when accelerating quickly.