How to replace the fuel pump on a Chevy Silverado?
How to replace the fuel pump on a Chevy Silverado?
Reconnect the fuel lines and electrical connectors to the fuel pump flange at their quick-connect fittings. Re-install the EVAP canister within its bracket and connect its lines. Connect the ground strap and shield back to the fuel tank and lower the Silverado off the jack stands. Reconnect the truck’s battery cable and fuel pump fuse.
How do you replace the fuel tank on a Chevy truck?
Press down on the module to seat its retaining ring and turn it clockwise to engage the locking tab. Place the fuel tank back on the jack and raise it back into position on the truck. Connect the straps with your wrench. Reconnect the fuel lines and electrical connectors to the fuel pump flange at their quick-connect fittings.
How do I replace the fuel pump module?
Press and release the locking tab on the fuel pump module’s flange ring using a needle-nose pointer while grasping the ring with a large pair of locking pliers. Turn the ring counterclockwise using the pliers to loosen it.
How does the gas tank work in a GMC?
Quick google search says that onboard computer monitors the fuel level in both tanks and averages the fuel remaining to show on your gauge. The primary fuel pump is in the front tank. When the level in the front tank drops, it sends a signal via a fuel pump relay to trigger the rear fuel pump to send fuel to the front tank.
How do you Drop the fuel tank on a Chevy Silverado?
This article will walk you through the second method of dropping the fuel tank. Open the hood. Pull the fuel pump relay from the fuse box. Start the vehicle and let it run until it shuts down. Figure 1. Pull the fuel pump relay and start the engine in order to relieve gas pressure in the line and the pump.
Where is the fuel pump on a 2005 Chevy Silverado?
This video outlines replacement of the fuel pump module on a 2005 Chevy Silverado Pickup in under 1 hours time. The fuel pump module is located in the fuel tank and this process involves lowering the fuel tank and replacing the pump assembly.
When do I need to drain my fuel tank?
That being said, there are times when it will is necessary to drain fuel from the tank, such as when replacing a fuel pump, cleaning a tank, or if you have accidentally filled it with the wrong type of fuel. In this guide we will go over two methods for draining fuel from a tank.
How do you replace a fuel pump relay?
Reconnect the power plugs to the top of the fuel pump with the quick connect wiring harnesses. Reconnect the fuel lines and lastly, reconnect the filler neck and tighten down the hose clamp and the vapor hose. Keep the truck in the air while you replace the fuel pump relay and start your truck.
