How to get a cat 246 skidsteer to start?

CHECK THE INPUT TO THE INTERLOCK ECM Turn the key start switch to the OFF position. Locate the interlock ECM. Remove the harness from the interlock ECM. Jumper contact 64 to contact 62 of the wire harness connector. Turn the key start switch to the START position. The engine should crank. OK – The engine cranks.

What’s the maximum pressure on a 248b skid steer?

A load sensing, variable displacement piston pump provides flow and pressure for the 248B loader and auxiliary circuit at 125 L/min (33 gal/min) at high idle. Maximum system pressure for High Flow auxiliary circuit is 28 000 kPa (4060 psi).

What does caterpillar skid steer loader stand for?

Designed, built and backed by Caterpillar®to deliver exceptional performance and versatility, ease of operation, serviceability and customer support. The Caterpillar Skid Steer Loader, with its many work tool options, is a highly versatile, compact construction machine.

How to check the skid steer loader battery?

CHECK THE VOLTAGE AT THE STARTING MOTOR Locate wire 304-WH on the starting motor. Turn the key start switch to the START position. Note: Two people will need to perform this procedure. One person will need to sit in the seat with the armrest down holding the key start switch to the START position.

Where is the skid steer loader cab located?

The Cat Skid Steer Loader cab is designed to make machine operation simple, productive and comfortable. Getting in and out of the cab is easy through a wide opening with three point grab irons and skid-resistant steps. Tilt cylinders are neatly located under the lift arms so not to interfere with operator access and egress.

How does a skid steer loader system work?

The dual, variable-displacement, axial piston pumps are driven directly off the engine and provide hydraulic flow to the drive motors via a closed loop system. Drive motors transfer mechanical power to the wheels via two high-strength, pre-stressed chains per machine side.

What kind of engine is in a cat 246?

The 3044C is the stock engine for the 246B/248B. Thanks for the help does anyone know of anywhere to get a used or rebuilt skidloader engine here in the U.S.? I agree, the Mitsubishi made 3044C would be a great engine.

How do you turn the key on a skidsteer?

Turn the key start switch to the START position. Note: Two people will need to perform this procedure. One person will need to sit in the seat with the armrest down holding the key start switch in the START position. Measure the voltage across the start relay coil from wire 306-GN to 202-BK.

What to do if your skidsteer wont start?

The engine will not crank when the key start switch is in the START position. Test Step 1. CHECK ARMREST INDICATOR Occupy the seat. Lower the armrest. Turn the key start switch to the ON position. Check the status of the armrest indicator and the parking brake indicator.

Where can I buy a caterpillar skid steer loader?

Built for tough work, the Caterpillar® Skid Steer Loaders deliver Cat reliability, durability, and efficient operation. This product may not be available near this location. Please contact your local dealer for assistance. Get 0% for 60 months and a Cat Customer Value Agreement (CVA).

Why does my cat 246 skidsteer not start?

This is only for early machines and can be different with higher serial number machines. The engine will not crank when the key start switch is in the START position. Test Step 1. CHECK ARMREST INDICATOR

How to start a skid steer loader battery?

Locate wire 304-WH on the starting motor. Turn the key start switch to the START position. Note: Two people will need to perform this procedure. One person will need to sit in the seat with the armrest down holding the key start switch to the START position. Measure the voltage on wire 304-WH on the starting motor.

What should the voltage be on a skidsteer?

One person will need to sit in the seat with the armrest down holding the key start switch in the START position. Measure the voltage at wire 304-WH on the start relay. The voltage should be equal to or greater than 10 DCV. OK – The voltage is equal to or greater than 10 DCV.

How tall is a caterpillar skid steer loader?

Dimensions Bucket Pin Height – Carry Position 10 in (25 cm) Bucket Pin Height – Maximum Lift 10.2 ft (3 m) Bumper Overhang – Rear Axle 41 in (104 cm) Clearance at Max Lift and Dump 7.9 ft (2 m) Clearance at Maximum Lift and Dump 94 in (239 cm)

Why does my skid steer engine not start?

If you have a not light, no crank issue, here is now to find the problem. The engine will not crank when the key start switch is in the START position. Test Step 1.

How to start a skid steer loader engine?

Turn the key start switch to the OFF position. Locate the interlock ECM. Remove the harness from the interlock ECM. Jumper contact 64 to contact 62 of the wire harness connector. Turn the key start switch to the START position. The engine should crank.

How to fix a cat 226 skid steer problem?

Replaced fuel cut off solenoid which fixed the shut off problem. Ran jumper wire from green wire to power relay A to green wire on power relay B and now all the lights come on and all my fuses have power. So now, machine starts and lights on console operate properly. Now…the pilot controls fail to operate when I push the park light switch.

If you have a not light, no crank issue, here is now to find the problem. The engine will not crank when the key start switch is in the START position. Test Step 1.