How to do the pinpoint test F for code b2293?
How to do the pinpoint test F for code b2293?
Instead of saying “P2293_18”, it will put the last 2 digits in the fault description as a “symptom”. It will read something like: “P2293 Air Bag Circuit Short to Battery (Symptom 18)” I would say that you have found why the light is coming on. Your airbag ohms should be under 5 ohms.
Can a DTC be used for a pinpoint test?
If no DTCs are stored, we use the pinpoint test suggested by the diagnosis by symptom chart. The pinpoint test, sometimes called a diagnostic flowchart, is a series of steps designed to achieve a diagnosis through a process of elimination. Following a pinpoint test is kind of like using a GPS.
When does the RCM indicate a fault?
When the RCM senses a short to ground on either of the driver air bag loop circuits, a fault will be indicated. When the RCM measures resistance less than 0.9 ohm between the passenger air bag loop circuits, a fault will be indicated.
When does the pinpoint test F indicate a fault?
When the RCM measures resistance less than 0.9 ohm between the driver air bag loop circuits, a fault will be indicated. When the RCM measures resistance greater than 5 ohms between the driver air bag loop circuits, a fault will be indicated.
Instead of saying “P2293_18”, it will put the last 2 digits in the fault description as a “symptom”. It will read something like: “P2293 Air Bag Circuit Short to Battery (Symptom 18)” I would say that you have found why the light is coming on. Your airbag ohms should be under 5 ohms.
When the RCM measures resistance less than 0.9 ohm between the driver air bag loop circuits, a fault will be indicated. When the RCM measures resistance greater than 5 ohms between the driver air bag loop circuits, a fault will be indicated.
What does DTC b2293 do for an air bag fault?
If the RCM detects a fault on any of the front air bag circuits, it will store DTC B2293 in memory and send a message to the instrument cluster module to illuminate the air bag warning indicator.
What should the ohms be on a p2293 air bag?
It will read something like: “P2293 Air Bag Circuit Short to Battery (Symptom 18)” I would say that you have found why the light is coming on. Your airbag ohms should be under 5 ohms. I do not know if reversing the wires in the connector shell would matter. Never replaced a connector shell at the airbag unit myself.
If the RCM detects a fault on any of the front air bag circuits, it will store DTC B2293 in memory and send a message to the instrument cluster module to illuminate the air bag warning indicator.
How much does it cost to repair a Ford b2293?
The cost of diagnosing the B2293 FORD code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
