How to change the turn signal bulb on a Dodge Dakota?

When changing the turn signal bulb in your Dakota, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely. Advance Auto coupon for 20% off entire order: KIOSK20

What does rapid blinking mean on a Dodge Dakota?

Rapid blinking indicates that a turn signal is burnt out on your 2002 Dodge Dakota SXT 2.5L 4 Cyl. Extended Cab Pickup About Us Maintenance Parts & Tools Contact English SpanishFrench Search Home Dodge Dakota 2003 Lights / Turn Signal – Front (replace bulb) Front Turn Signal Change Dodge Dakota (1997-2004) 1.

When does a Dodge Dakota Flasher go out?

If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn’t blink at all / stays stuck when engaged, this is your Dakota’s way of telling you that a turn signal bulb is burnt out.

How to troubleshoot a burnt out turn signal bulb?

Troubleshooting for burnt out turn signal bulbs in your Dakota is relatively easy – turn your hazard lights on and check the front of your Dakota and then the back, whichever side is not illuminating is the side with the burnt out bulb.

Can you replace the headlight on a Dodge Dakota?

The headlights are the same for a 1997 to 2004 Dodge Dakota as well as a 1998 to 2004 Dodge Durango. They are a bit tricky to remove but once you see how they come out its pretty simple. We adjust the bumper as well so that our headlight gap is even on both sides and reinstall the new black housing headlights.

How can I tell if my right turn signal is working?

Turning the right turn signal on while backprobing the light blue/yellow wire proves that the right side of the turn signal switch is working properly. The same test is done on the light blue/white wire while turning on the left turn signal. Since all tests were positive the diagnosis is a faulty combination flasher assembly.

How to change the turn signal on a 2002 Dodge Dakota?

Free video instruction on how to replace a burn out front turn signal bulb on a 2002 Dodge Dakota SXT 2.5L 4 Cyl. Extended Cab Pickup. Rapid blinking indicates that a turn signal is burnt out on your 2002 Dodge Dakota SXT 2.5L 4 Cyl. Extended Cab Pickup About Us Maintenance Parts & Tools Contact English SpanishFrench Search Home

Where are the turn signal relays on a Dodge Ram?

Check the flasher relay: On the driver’s side of the cabin, between the dashboard and the door, you will find a small panel covering the fuse/relay box. Refer to the inside sticker of the fuse box panel and locate the two flasher relays. Switch the relays, and check if the turn signal lights are flashing.

What kind of light bulb do I need for my Dodge?

Find the Dodge headlight bulb size you need for your low beam or high beam. Also, find your Dodge fog light bulb, reverse light bulb, turn signal bulb, brake light bulb and more. It’s that easy! The best part?

How to change the turn signal on a Dodge Ram?

Refer to the inside sticker of the fuse box panel and locate the two flasher relays. Switch the relays, and check if the turn signal lights are flashing. If one or both of the relays fails to turn on the turn signal light, replace as needed.

What are the warning lights on a Dodge?

What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by Dodge. Click a link to learn more about each one.

Why are my tail lights not working but brake lights are working?

Burnt out light bulbs – The other reason your tail lights are not working but your headlights are maybe a blown bulb. When the filament inside the bulb breaks it cannot illuminate the gas enclosed within the glass cover. This burnt-out bulb does not affect the circuitry of the light system and it continues to function normally.

How can I tell if my tail lights have a fuse?

When you have located the fuse for the tail lights use a fuse tester to check the connection. If the tester lights up – your fuse is functioning fine. If it does not light up then, replace the fuse with another of the similar amperage and size. In many instances, you can see the break in the metal strip of the fuse.

Why are the tail lights on my Dodge Ram not working?

Not open for further replies. I need some help here. I have a 2003 Dodge Ram 1500, and the Tail Lights just stopped working. The Break Lights, Turn Signals, Reverse Lights all work, but the Rear Parking Lights and License Plate Light isn’t working at all…

What happens when your tail lights are not working?

When the tail lights fail or do not function properly the car becomes a danger or hazard to self and others on the road. You may receive a ticket or citation from the traffic police. Blow fuse – The first thing the mechanics check is the fuse corresponding to the rear lights.

How do you fix a corroded tail light relay?

I traced the lan that operates the tail light relay and it was corroded through. It was visually obvious. I soldered a piece of 18 gage wire around the corroded spot and wah-lah, tail lights again. Check your fuses. I had one fuse out that only took out my right tail light.