Common questions

How often to change transmission fluid ford Flex?

How often to change transmission fluid ford Flex?

Still, most owner’s manuals will recommend changing the transmission fluid every 90,000 miles or so. Flushing your transmission’s fluid has fallen out of vogue in recent years because the high-pressure cleaning involved may dislodge debris inside the transmission that can literally gum up the works.

How many quarts of transmission fluid does a ford Flex take?

10 quarts
For Automatic Transmission: 6F50….MLV

Notes: Late models (Check the transmission dipstick for the correct fluid to use)
Capacity: 6 speed 6F50 Total Fill 10 quarts

How much should transmission fluid change cost?

It depends on where you take it. At a mechanics shop or dealer, the price will likely range between $80 to $250. However, if you’re willing and able to do it yourself, it should fall between $50-$100.

Should you flush transmission fluid?

The general recommendation is to flush your transmission every 2 years or 30,000 miles. In most cases, getting a transmission flush every 30,000 miles, or every two years or so is sufficient. However, there may be times when you need to get a transmission flush sooner, in order to help protect your car’s transmission.

What kind of transmission fluid does a 2010 Ford Flex take?

Lubegard Synthetic Synthetic Transmission Fluid Dexron VI 1 Quart.

Is it OK to drain transmission fluid after oil change?

I, like many of you, don’t trust the 150k oil change interval on these transmissions and wound much rather drain 1/2 of it out (this is all you get by draining) and refill just for the peace of mind.

How do you get Trans fluid in a Ford F150?

This is how you get the rest of the fluid in (with the engine running and pumping trans fluid). Let the fluid warm up with the engine idling. Mine made it up to 180 degrees. Leave the dipstick out and stick your fill tube back in. Leave the engine running the entire time. This is the only way to get the proper fill. Engine on and transmission hot.

Where is the drain plug on a Ford Flex?

PTU design is the same for Flex, Edge, Taurus, Explorer. Newer units do have both fill and drain plugs. I don’t know when they added the drain plug but my ’14 has it down near the bottom on the passenger side of the unit.

How much does it cost to change Ford Flex oil?

Rrr. and my local Ford dealer won’t touch it because the engineers say it’s a sealed for life unit and the only way to change the oil is to remove the unit for $600 labour!

I, like many of you, don’t trust the 150k oil change interval on these transmissions and wound much rather drain 1/2 of it out (this is all you get by draining) and refill just for the peace of mind.

This is how you get the rest of the fluid in (with the engine running and pumping trans fluid). Let the fluid warm up with the engine idling. Mine made it up to 180 degrees. Leave the dipstick out and stick your fill tube back in. Leave the engine running the entire time. This is the only way to get the proper fill. Engine on and transmission hot.

When do you add transmission fluid to a Chevy Silverado?

Chevrolet has been developed sophisticated transmissions through years and it is critical that you add the exact type of transmission fluid stipulated by your owner’s manual (typically in the back of the manual in a section titled Fluid Capacities.)

Is there aftermarket filter for Toyota transmission fluid?

The aftermarket filter will also catch the dust when the case bearing trashes itself and grinds up the aluminum case into fine dust that isn’t caught by the pan filter or magnet. But, I still like the u660/u760 family of Toyota transmissions regardless of the known issues. Glad that they don’t ‘flare shift’ anymore.

Author Image
Ruth Doyle