How much oil does a 2003 Tacoma V6 take?

5.5 quarts (with filter)After refill check oil level.

What oil does a Toyota Tacoma V6 take?

The Toyota Tacoma with a 3.5L 6-cyl engine (engine code 2GR-FKS) takes 6.2 quarts (with filter) of 0W-20 synthetic oil. A new oil filter and a crush washer are required.

How much oil do you put in a 2003 Toyota Tacoma?

The 2003 Toyota Tacoma takeS6 quarts of oil. Your oil needs to be replaced eventually. Every 5,000 to 10,000 miles is a good rule of thumb.

What is the best oil for Toyota Tacoma?

Best Oils For Toyota Tacoma – 2021 Picks

OUR TOP PICK: Mobil 1 Advanced Full Synthetic 5W-30.
RUNNER-UP: Castrol 1597B1 Edge Extended Performance 5W-30 Advanced Full Synthetic.
BEST BUDGET OPTION: Valvoline Advanced Full Synthetic SAE 0W-20.
EDITOR’S PICK : Royal Purple 06020 SAE 0W-20 High Performance Synthetic.

How much oil do I put in my 2002 Toyota Tacoma?

Capacity: 5.5 quarts. . . (with filter)After refill check oil level.

What kind of oil does a Toyota Tacoma use?

Here is a list of engine oil types and capacities for a Toyota Tacoma. Reference the model year in the table with the corresponding engine to see what oil type and capacity is applicable for your car.

How big is the oil cooler on a Toyota Tacoma?

Factory Maintenance Specifications. Engine code: 2GR-FKS. Engine size and configuration: 3.5L V-6. Engine oil capacity w/ filter change : 6.2 US qts w/ oil cooler, 6.1 US qts w/o oil cooler. Engine oil viscosity (SAE): 0W20. Oil pan drain plug torque: 40 Nm / 30 ft lbs.

How to check oil level in Toyota Tacoma?

Be sure the threads and sealing surface for the oil filter drain valve plug on the oil filter cap are clean and install the drain plug, torquing to 13 Nm / 10 ft lbs. Refill the engine with the recommended amount and type of oil using a oil funnel and check the oil level.

How do you install an oil filter on a Toyota Tacoma?

Install the new oil filter in the oil filter cap. Be sure the threads and sealing surface on the engine are clean, and hand thread the oil filter cap into the engine ensuring the O-ring seats properly. Tighten the oil filter cap using the MX2320 oil filter wrench to 25 Nm / 18 ft lbs.

How much oil does a Toyota Tacoma take?

4.0 V6 should take 5.5 to a hair under 5.7 quarts. either way. 4.0 V6 should take 5.5 to a hair under 5.7 quarts. Click to expand… My bad, us first gens have to pull the skids to change ours. You didn’t mistakenly drain the tranny, did you? Also, the dipstick isn’t worth a shit. Click to expand… brother.earth likes this.

What kind of engine does a Toyota Tacoma have?

Tacoma 2.4 16V 2WD (CAN) (RZN 140/150) (1996 – 1996) 2RZ-FE 5.5 l 5.81 US Quarts / Filter: 0.7 l 0.74 US Quarts 6 000 km / 6 months Tacoma 2.4 16V 2WD (USA) (RZN 140/150) (1998 – 1998)

How many quarts does a Tacoma V6 take?

Definately need to figure that out. Click to expand… either way. 4.0 V6 should take 5.5 to a hair under 5.7 quarts. either way. 4.0 V6 should take 5.5 to a hair under 5.7 quarts. Click to expand…

How much oil does a 2003 Tacoma V6 take?