How much is a serpentine belt for a 2003 Dodge Ram?

How much is a serpentine belt for a 2003 Dodge Ram?

The average cost for a Dodge Ram 1500 serpentine belt replacement is between $122 and $136. Labor costs are estimated between $52 and $65 while parts are priced at $70.

How do you change the serpentine belt on a 6.7 Cummins?

Let’s start replacing:

1. Pop the hood.
2. Release the tensioner from the A/C pulley.
3. Remove the airbox.
4. Release the tensioner (undo one bolt) and move it out of the path by rotating it clockwise.
5. Pull out the old belt.
6. Guide the new belt up each pulley as per the diagram, but make sure you leave the tensioner for last.

What kind of engine does a Dodge Magnum have?

The Chrysler/Dodge 318 Magnum is a 5.2 l (5,211 cc, 318.0 cu.in.) natural aspirated V8 90° four-stroke gasoline engine from Chrysler LA/Magnum-family. This engine was manufactured from 1992 up to 2003.

What’s the compression ratio on a Dodge Magnum?

With a true 58cc casting such as the EQ Magnum or Edelbrock Performer RPM heads you’ll be in the vicinity of 9.5:1 compression with the stock short block. If you’re swapping the Magnum into a car, and you’re interested in performance and horsepower, shelf-stock camshaft options for the Magnum engine are limited.

What kind of engine does a Chrysler 318 Magnum have?

The Chrysler 318 Magnum features a cast-iron block and two cast-iron heads with a single camshaft (OHV) and two valves per cylinder (16 valves in total). The Chrysler 3.9L Magnum engine is equipped with a multi-point fuel injection system and a mechanically timed electrical ignition system with an ignition coil and mechanical distributor.

What’s the Max Lift on a Dodge Magnum?

While max lift is related to cam duration and other factors, we are using a .550+ lift cam in our shop car, did not need to flycut the pistons, and have more than the minimum clearance. Important note 3: You should ALWAYS check piston/valve clearance and retainer/guide clearance when installing a new cam.

Where can I buy a Dodge Ram belt?

Shop AutoZone for Dodge Ram 1500 Belt. 10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only

What kind of engine does a 2003 Dodge Ram have?

The Specs on the 2003 Dodge Ram 1500 With a 4.7 Liter Engine by James Rutter In 2003, Dodge continued production of the third generation of the Ram 1500, a successful line of half-ton trucks that the company had first manufactured in 1994. The 2003 models continued the redesigned model introduced the previous year.

When did the Dodge Magnum get a 4.7 liter engine?

The company installed the 4.7-liter as standard in the SLT and Laramie trim levels. Until 2002, Dodge hadn’t installed a 4.7-liter engine in its cars or trucks in 41 years. This V-8 Magnum, based on the 1998 Chrysler PowerTech platform, consisted of an iron block and aluminum alloy heads.

How big is the crankshaft on a Dodge Magnum?

The crankshaft main journal diameter is 63.5 mm (2.5 in) and the crankpin diameter is 53.0 mm (2.08 in). After securing bearing cap bolts, make sure crankshaft turns smoothly by hand.