How much HP does it take to run a baler?
How much HP does it take to run a baler?
Most standard square balers on the market require 35 horsepower at your tractor’s PTO, and a minimum tractor weight of around 3000 pounds.
How many HP does it take to run a 3×3 baler?
Key Specs
| Bale | 80×90 cm 3×3 ft |
|---|---|
| Machine – Width | 2.76 m 9.1 ft |
| Machine – Height | 2.7 m 8.9 ft |
| Machine – Weight | 7,700 kg 16,975 lb |
| Minimum tractor requirement | 86 kW 115 PTO hp – no Pre-Cutter 97 kW 130 PTO hp – with Pre-Cutter |
How much horsepower does it take to run a disc mower?
A new 9 ft cut disc mower/conditioner with rubber rolls from NH calls for 65 HP. But if you move up to the 10 foot cut NH, minimum HP is 80. Keep in mind that these ratings are for ideal conditions (flat land, uniform crop, etc.) and running at pretty high ground speeds.
What is the best round baler on the market today?
What is the best round baler for your farm?
- John Deere 459 Round Baler.
- John Deere 469 Round Baler.
- John Deere 559 Round Baler.
- John Deere 569 Round Baler.
- John Deere 569 Silage Special Baler.
- John Deere 854 Silage Baler.
- John Deere 569 Premium Round Baler.
- John Deere 469 Premium Round Baler.
How many bales is a lot for a round baler?
Most round balers can easily get 6 or 7000 bales before breaking even one belt, and most round balers can put through at least 30,000 bales before needing complete belt replacement.
How does a disc mower work?
Disc mowers were invented as a logical progression from the sickle bar design. Instead of blades moving back and forth on the cutter bar though, they are mounted on several small discs that rotate at high speeds, mounted on top of the cutter bar. Generally, there are 2 free-swinging blades bolted to each disc.
How much does a disc mower weight?
Mower
| Number of disks | Seven |
|---|---|
| Number of knives | 14 |
| Width of cut | 2.8 m 9.17 ft |
| Transport width | |
| Weight | 669 kg 1475 lb |
How much horsepower does a John Deere Baler need?
A tractor with a power take-off speed (PTO) of 540 revolutions per minute (RPM) and 35 horsepower (HP) is the minimum required to operate the baler. The 348 is equipped with two knotters.
Can a JD 635 run a round baler?
We ran a JD 635 with a 185 Allis with no problem, we have also ran the same baler with a 175 Allis but it was a bit light on hills, worked fine on flat ground. So I would say you need to look at more than just HP but weight of the tractor, type of ground. I baled with my 3020 gas this summer on a JD 510 round baler.
How much does a John Deere 566 round baler cost?
ALL NEW MEMBERS PLEASE READ THIS FIRST!!! Discussion in ‘ Agricultural Operations ‘ started by JBGASH, Jan 29, 2013 . Looking at a 566 JD round baler with around 4000 bales on it with net wrap. It is priced at 9500.00 and appears in good shape overall.
Do you need hp to run round hay balers?
Hard core dry hay bales don’t take a lot of HP. Making wet haylage bales is a bit of a different story. while climbing hills. And on hilly ground you are also better off using a bigger heavier tractor while baling on a down hill side, as you will need to stop the tractor and baler to tie and eject the bale. A 5×4
How many horsepower does a John Deere round baler need?
There are 16 different options in the John Deere Zero Series Baler line. Each model is listed below from lowest to highest horsepower requirements. The low horsepower round balers, like the 450E, 450M, and 550M models can be paired with any of the John Deere 5-Series or 6-Series utility tractors.
We ran a JD 635 with a 185 Allis with no problem, we have also ran the same baler with a 175 Allis but it was a bit light on hills, worked fine on flat ground. So I would say you need to look at more than just HP but weight of the tractor, type of ground. I baled with my 3020 gas this summer on a JD 510 round baler.
How much does a JD Baler tractor cost?
He said “we only seem to sell JD balers to existing JD baler owners, other people don’t want to buy them”. He has about 5 273 NH balers, 4 311’s, 3 315’s and 2 316’s. Price ranges from $2300-5950.
Why do John Deere balers have more problems than New Holland?
He said the John Deere balers that come in have many more problems than the New Holland ones due to the stress exerted on the baler by the kicker when it throws. He didn’t elaborate, but he was willing to sell some pretty new looking JD balers for dirt cheap due to that fact.
