How much does it cost to replace a water pump on a Dodge Dakota?
How much does it cost to replace a water pump on a Dodge Dakota?
The average cost for a Dodge Dakota water pump replacement is between $293 and $398. Labor costs are estimated between $181 and $229 while parts are priced between $112 and $170.
How do you remove a water pump assembly?
Remove water pump assembly. Remove the alternator bracket bolts and power steering pump bracket from the water pump by turning them counterclockwise with socket and socket wrench. You will also need to remove the bolts and pulley connecting the water pump to the timing chain. Pull out the water pump assembly from the engine block. Figure 5.
How do you replace a water pump in a Dodge Ram?
Remove the four bolts that hold the A/C compressor to the bracket, and then remove the accessory bracket that mounts to the intake manifold. This entire assembly needs to come out. Take care when pulling the bolts. This is a pretty heavy piece of equipment that is coming off. Don’t let it drop. Figure 7.
How do you install a water pump on a Ford truck?
Install water pump. Place the water pump gasket on the water pump and align the bolt holes with the pump and gasket. Mount the water pump onto the engine block, and fasten the pump bolts by hand in clockwise motion and use a socket and torque wrench to tighten them. Figure 7. Place everything back in.
What do you need to replace a water pump?
Scrape off the old gasket from the engine block. Scrape the engine block where the water pump was with a gasket removing scraper to clean the surface. To replace the water pump, spread a gasket sealer on the water pump mounting surface on the water pump back side and on all mounting bolts.
Can a water pump go bad on a Dodge Dakota?
When the water pump goes bad on the Dodge Dakota, you will of course have to replace it. The procedure is the same regardless of the engine that is in the truck, but the water pump in trucks with a 2.5-liter engine is distinctly different.
Remove the four bolts that hold the A/C compressor to the bracket, and then remove the accessory bracket that mounts to the intake manifold. This entire assembly needs to come out. Take care when pulling the bolts. This is a pretty heavy piece of equipment that is coming off. Don’t let it drop. Figure 7.
Remove water pump assembly. Remove the alternator bracket bolts and power steering pump bracket from the water pump by turning them counterclockwise with socket and socket wrench. You will also need to remove the bolts and pulley connecting the water pump to the timing chain. Pull out the water pump assembly from the engine block. Figure 5.
How do you replace a water pump in a Ford F-150?
Unfasten the fan shroud bolts. Use a flat head screw driver to remove the radiator and the bypass and heater hoses. Using the screw driver, turn the hose clamp screw anti-clockwise until the clamp loosens. You will be able to locate the water pump on the engine front. Separate each hose from the water pump.
