How much does a DT360 weigh?
How much does a DT360 weigh?
My info on the DT466 shows 47-inches high, 26-inches wide, 47-inches long and weighs 1445 lbs.
How many liters is a DT360 engine?
Specifications of the International DT360 Engine Displacement. The International DT 360 has a displacement of 360 cubic inches or 5.9 liters; produced by six in-line… Production.
How do you turn a DT360?
Take the plug off with either a 5/16″ or 8mm allen wrench. Spin the star wheel towards the front of the pump(rotate towards the pass side) to increase low end power(smoke)and away for less low end smoke(essentially releasing the tension on the spring inside).
How much power and torque with a DT360?
Depends on the conditions. If it’s in a pickup, you can go hog wild on power. If it’s in a tri-axle dump, then I wouldnt be going much over 300hp/600tq. The same mods you do to the Cummins 5.9 can be applied to the 360.
When did the International DT360 engine come out?
The International DT360 was manufactured from 1987 to 1993 for trucks and buses, after which the DT-466, the last mechanical fuel injection model of the DT family, was produced. The DT360 was manufactured as a high and low torque model.
Which is better Cummins DT 360 or DT 466?
Boy- IMO to compare those three engines is like comparing apples to apples. Each of them has their advantages. The DT 360 is one tough running engine, as is the DT 466. The advantages to those are that they are both wetsleeve engines.
What kind of valve cover does a DT360 have?
The DT/DTA 360s have ribbed valve covers – bumps go UP. The DT/DTA 466s have humped valve covers with the ridges go inward. If it has an Aluminum valve cover, it’s a DT408/466 or 530 (New Generation Diesel) style.
Is the DT360 a high or low torque engine?
The DT360 was manufactured as a high and low torque model. The high torque model managed horsepower ratings of up to 210 horsepower while the low torque engine reached was rated at 160 horsepower. Low Buck Diesel Power: International DT360.
How big is the displacement of the DT 360?
Displacement. The International DT 360 has a displacement of 360 cubic inches or 5.9 liters; produced by six in-line cylinders with a bore and stroke of 4.010 by 4.751 inches.
The International DT360 was manufactured from 1987 to 1993 for trucks and buses, after which the DT-466, the last mechanical fuel injection model of the DT family, was produced. The DT360 was manufactured as a high and low torque model.
The DT/DTA 360s have ribbed valve covers – bumps go UP. The DT/DTA 466s have humped valve covers with the ridges go inward. If it has an Aluminum valve cover, it’s a DT408/466 or 530 (New Generation Diesel) style.
