Common questions

How many times can you put fuel injector in your car?

How many times can you put fuel injector in your car?

Gas vehicles, on the other hand, have a little more leeway. Generally, you can use fuel injector cleaner every 1,500 to 3,000 miles. Many people like to use fuel injector cleaners whenever they get an oil change, as it’s easy to remember.

Is there an injector pulse on my car?

SOLVED: I have no injector pulse. I have plenty of fuel – Fixya I have no injector pulse. I have plenty of fuel pressure and both crank sensors and the cam sensor are good. If I spray carb spray through a vacuum hose, it runs fine, but I’m getting nothing through the injectors.

Can a fuel injector test be done while the engine is running?

However, you can do this test when the engine is running to see if a certain fuel injector is getting a signal to fire if the engine seems to be misfire for some reason. Below is a picture of my Noid light set. Here is a picture of the Noid light I use most of the time.

How does the engine control unit control the injector pulse?

Question: What controls the fuel injector pulse? Ans: The engine control unit is the electronic brain that used to control the fuel injector pulse by gathering data from various sensors along the fuel line

Can a PCM loose all 6 injectors at once?

The PCM is set up so that it has individual injector drivers, Meaning that you could loose 1 or 2, but loosing all 6 at one time is very unlikely. Injectors do run off both crank and cam sensors, but mostly off the cam. And when the cam sensor does fail, The PCM goes into default mode, using the last stored run.

What causes no power to fuel injector pulse?

Ans: The engine control unit is the electronic brain that used to control the fuel injector pulse by gathering data from various sensors along the fuel line Question: What causes no power to fuel injectors?

Question: What controls the fuel injector pulse? Ans: The engine control unit is the electronic brain that used to control the fuel injector pulse by gathering data from various sensors along the fuel line

Why do fuel injectors need to be changed so often?

If an engine isn’t running efficiently, this can load extra pressure on injectors. It’s also important, to regularly change the fuel filter, to ensure a proper fuel flow. Driving Habits. Driving a car hard, combined with short start stop journeys, will increase the wear and tear on injectors.

What causes a fuel injector to leak over the engine?

So, the most common cause of leaky injectors is; the failure of the O-ring, where the injector meets the fuel rail. The O-ring can become, hard and brittle, from the heat of the engine. If it breaks, then fuel can leak out, over the engine. The other way an injector will leak is if, the injector body or nozzle cracks.

Author Image
Ruth Doyle