How is the toe on a Dodge Caliber adjustable?
How is the toe on a Dodge Caliber adjustable?
The toe is adjustable by the toe link and the adjustable cam bolt on the inboard side. Rear camber settings on this vehicle are determined at the time the vehicle is designed, by the location of the vehicle’s suspension components.
What kind of car is the Dodge Caliber?
The Dodge Caliber is a compact car produced by the Dodge division of Chrysler. The same basic platform is used for the Sebring, Avenger, Jeep Patriot/Compass and Mitsubishi Lancer. This is a “Net Build” vehicle with only toe adjustments built into the vehicle.
What is camber adjustment package for Dodge Caliber?
The camber adjustment bolt package contains new bolts and nuts for attaching the strut clevis bracket to the steering knuckle. The bolts contained in the package are slightly undersize allowing for movement between the strut clevis bracket and the steering knuckle.
Where is the pivot bolt on a Dodge Caliber?
FRONT – On each side of the vehicle, measure the distance (2) from the lower control arm rear (vertical) pivot bolt head (1) to the floor or alignment rack/lift runway surface. It may be necessary to measure to the bottom of a straight edge (3), placed from lift runway to runway, to get an accurate measurement.
The toe is adjustable by the toe link and the adjustable cam bolt on the inboard side. Rear camber settings on this vehicle are determined at the time the vehicle is designed, by the location of the vehicle’s suspension components.
The Dodge Caliber is a compact car produced by the Dodge division of Chrysler. The same basic platform is used for the Sebring, Avenger, Jeep Patriot/Compass and Mitsubishi Lancer. This is a “Net Build” vehicle with only toe adjustments built into the vehicle.
The camber adjustment bolt package contains new bolts and nuts for attaching the strut clevis bracket to the steering knuckle. The bolts contained in the package are slightly undersize allowing for movement between the strut clevis bracket and the steering knuckle.
FRONT – On each side of the vehicle, measure the distance (2) from the lower control arm rear (vertical) pivot bolt head (1) to the floor or alignment rack/lift runway surface. It may be necessary to measure to the bottom of a straight edge (3), placed from lift runway to runway, to get an accurate measurement.
How is the camber on a Dodge Caliber adjustable?
The movement allowed by the undersize bolts provide approximately two degrees of camber adjustment per side of the vehicle. The toe is adjustable by the toe link and the adjustable cam bolt on the inboard side.
Where are the torque settings on a MG?
Bolt/fixing Nm ft.lb Engine Engine Engine Camshaft cover bolts 9 7 Camshaft gear bolt 8mm bolt 10mm bolt 33 65 24 48 Crankshaft pulley bolt 205 151
How tall are the wheels on a Dodge Caliber?
Cars with 15-inch wheels should have a measurement of 205mm (8.07”) in front. In the rear, these models should have 329mm (12.95”). For all other models, the ride height in the front should be 214mm (8.43”) and 338mm (13.31”) in the rear. The ride height should not vary more than 8mm (0.32”) from the specifications.
How can I adjust my Dodge Caliber strut?
Chrysler recommends shifting the cradle to adjust the camber and caster. Camber is adjustable with a lower bolt kit for the strut. The kit will only give ±1º of camber. Aftermarket camber adjustment bolts are also available from various manufacturers.
Cars with 15-inch wheels should have a measurement of 205mm (8.07”) in front. In the rear, these models should have 329mm (12.95”). For all other models, the ride height in the front should be 214mm (8.43”) and 338mm (13.31”) in the rear. The ride height should not vary more than 8mm (0.32”) from the specifications.
What are the torque specifications for a Chrysler 2.0L 122ci S4?
480 54.23 Power Steering Pump Bracket Mounting Bolts Type: Bolt 18 216 24.4 DOHC – Cap Bolts (Caps 1 & 6; Outer) Type: Bolt 8.75 105 11.87 DOHC – Cap Bolts (Caps 2 – 5; Inner) Type: Bolt 2.5 30 3.39 Camshaft Target Magnet Retainer Bolt Type: Bolt 7.08 85 9.61 Camshaft Position Sensor Bolt Type: Bolt 20 240 27.12 Type: Bolt 22 264 29.83
