How does the PATS system work on a Ford?
How does the PATS system work on a Ford?
Pats is a system that automatically detects whether you have the original key to start up the engine or some cheap key from Walmart. The system initially started to make its way into Ford vehicles around 1996. From there, the system was added to many more Ford vehicles. Losing the original key means you no longer have access to the car.
Is there a way to bypass the PATS system?
If you don’t want to spend money on a new transponder key, or can’t be bothered to set up a new key, don’t worry; we have you covered. Throughout this guide, we’ll cover how you can bypass the PATS system without losing your mind in the process.
What happens if you lose your Ford Pats key?
Learning how to disable Ford pats system is critical if you ever lose your extra key. For instance, there is nothing more annoying than losing your transponder key, since now you can’t start up your own car. If you don’t want to spend money on a new transponder key, or can’t be bothered to set up a new key, don’t worry; we have you covered.
What are the different types of Pats systems?
Like any electronic system, Ford has gone through several variations on the PATS system. There are five variations of PATS in use on Ford vehicles. Systems are identified as types A, B, C, D, E, F and G . The PATS control is a stand alone module. When you turn the key to RUN/START, the theft warning light turns on for 2-seconds.
Where is the PATS system located on a Ford?
Over the years, Ford has located the PATS module in different places; • In some vehicles, it’s built into the instrument cluster • On some models it’s a separate module. • On some late model vehicles, the PATS module is located behind the steering column shroud and contains an antenna connected to a small electronics module.
Why is the PATS system not working properly?
The PATS control module in the PCM provides ground to the starter relay and enables the fuel pump and injectors. The PATS system isn’t working properly if: If the vehicle runs for more than 1 second, then stalls, it is not a PATS issue. PATS cannot cause a running vehicle to stall.
What are the trouble codes for Ford Pats?
Most of the PATS trouble codes are body “B” or data “U” type codes. You must have a code reader that can read these codes. Repairing a PATS system is NOT hard. B1213 Less than 2 (or 3 if equipped w/Valet key) keys programmed to the system. B1232/B2103 Transceiver internal antenna damaged. Replace transceiver.
How to run Ford Pats relearn procedure module?
Enter Security Access on the PATS control function module. Select “Ignition Key Code Program.” Disconnect Tool and leave key in RUN for 20 seconds. 1 key required. Cycle key 1 to RUN, then OFF. Cycle new key to RUN. 2 keys required. Cycle key 1 to RUN, then OFF. Cycle key 2 to RUN, then OFF. Cycle new key to RUN. Cycle a key in ignition to RUN.
When to look for fault codes in Ford Pats?
Look for fault codes in The PATS function will store fault codes when the PCM records a P1260. Be certain of the vehicle model Use only parts & keys specified for the appropriate model year. Check to make sure the issue is not with multiple PATS keys, small electronic devices that can be used to purchase gasoline, or other items on same key ring.
How to relearn Ford Pats code erase procedure?
Select “Ignition Key Code Erase.” Disconnect Tool and leave key in RUN for 20 seconds. Cycle key 1 to OFF, then RUN, and back to OFF. Cycle key 2 to RUN. 2 keys required. Cycle key 1 to RUN. Select “Ignition Key Code Erase.” Disconnect Tool and leave key in RUN for 20 seconds. Cycle key 1 to OFF, then RUN, and back to OFF.
How to relearn Ford Pats control function module?
Enter “Ignition Key Code Erase.” Disconnect Tool and leave key in RUN for 20 seconds. Cycle key to OFF and then RUN. 2 keys required. Cycle key 1 to RUN. Enter Security Access on the PATS control function module. Select “Ignition Key Code Erase.” Disconnect Tool and leave key in RUN for 20 seconds. Cycle key 1 to OFF, then RUN, and back to OFF.
Look for fault codes in The PATS function will store fault codes when the PCM records a P1260. Be certain of the vehicle model Use only parts & keys specified for the appropriate model year. Check to make sure the issue is not with multiple PATS keys, small electronic devices that can be used to purchase gasoline, or other items on same key ring.
Select “Ignition Key Code Erase.” Disconnect Tool and leave key in RUN for 20 seconds. Cycle key 1 to OFF, then RUN, and back to OFF. Cycle key 2 to RUN. 2 keys required. Cycle key 1 to RUN. Select “Ignition Key Code Erase.” Disconnect Tool and leave key in RUN for 20 seconds. Cycle key 1 to OFF, then RUN, and back to OFF.
Can you use aftermarket keys with Ford Pats?
The Ford FCSD aftermarket remote entry system comes with a starter interrupt that should be disabled on PATS equipped vehicles. Do not use aftermarket keys that are NOT Ford qualified.
