How do you split a 18 Speed Shift?

The 18 speed transmission is laid out in an ‘H’ pattern. The easiest way to become familiar with the 18 speed is to practice shifting in an H pattern. The driver uses second, third, fourth, and fifth, then splits up into high range. Then, shift the H pattern again for sixth, seventh, eighth and ninth gear.

Is the Eaton RTLO 18913a a manual transmission?

RTLO-18913A is ideal for vocational fleets currently operating eaton manual transmissions and considering an automated transmission. Eaton medium and heavy-duty automated transmissions are easy to drive and versatile meeting all your needs to be on the road. Pro Gear and Transmission, Inc gets you up and and running in no time.

What kind of lubrication does Eaton Fuller transmission use?

Eaton Fuller transmissions are designed so that the internal parts operate in a bath of oil circulated by the motion of gears and shafts. Thus, all parts will be amply lubricated if these procedures are closely followed: 1.

What causes transmission to walk apart in Eaton Fuller?

Tapered or worn clutching teeth will try to “walk” apart as the gears rotate. Under the right conditions, slipout will result. Some of these conditions are: Transmission mounted eccentrically with engine flywheel pilot. Excessive gear clashing which shortens clutching teeth.

How to troubleshoot an Eaton heavy duty transmission?

Guide to servicing and repairing Eaton Fuller heavy-duty truck transmission, assistance locating the issue of transmission trouble, analyze the cause and make necessary repairs for 7, 8, 9, 10, 13, 15 and 18 speed Eaton transmissions. For more in-depth assistance refer to your transmission model service manual or give us a call at 877-776-4600.

What are the problems with an Eaton Fuller transmission?

Oil level too low or too high, wrong type of oil, or an operating angle of more than 12 degrees. 2. Operating consistently under 20 MPH. 3. High engine RPM. 4. Restricted air flow around transmission, due to the transmission being “boxed in” by frame rails, deck lids, fuel tanks and mounting brackets, or by a large bumper assembly.

What causes hard shifting on an Eaton transmission?

Linkage problems stem from worn connections or bushings, binding, improper adjustment, lack of lubrication on the joints or an obstruction which restricts free movement. To determine if the transmission itself is the cause of hard shifting, remove the shift lever or linkage from the top of the transmission.

How big is a fuller 13 speed transmission?

Fuller® 13-Speed Transmissions MODEL CAPACITYWEIGHT*SPEEDS LENGTH** RTLO-16913A 1650 lbs.ft. [2237 Nm] 716 lbs. [325 kg] 33.1 in. [841 mm] 13 forward, 2 reverse RTLO-18913A 1850 lbs.ft. [2508 Nm] 716 lbs. [325 kg] 33.1 in. [841 mm] 13 forward, 2 reverse

How do you split a 18 Speed Shift?