How do you replace the ignition switch on a bike?
How do you replace the ignition switch on a bike?
Put the new ignition switch in place and screw it in with your new bolts. Use red thread locking compound on the bolt shafts (because it would just suck if that switch fell off when you were riding; the red stuff is also strong enough to prevent a nefarious someone from easily removing the switch while on the bike).
How long does it take to replace an ignition switch?
The procedure is fairly straightforward. You’ll remove the top triple tree, drill off the security bolts, bolt on the new switch, and put it all back together. This even works with the fork lock engaged. If you have all the tools together, and a reasonable working environment, it shouldn’t take more than about 2 hours.
What to do if your ignition cylinder is worn out?
How To Fix It: Fortunately, this is an easy fix. Just turn the wheel back and forth until the ignition cylinder is freed. It’s a fact of life that mechanical things tend to wear out, and the same goes for mechanical keys and key cylinders used in your car’s ignition system.
How often should you insert and remove the ignition key?
You may insert and remove the ignition key thousands of times every year, wearing the key and tumblers ever-so-slightly every time. Heavy keychains can add more stress to the ignition cylinder, increasing wear. After a while, the key may fall out of the cylinder or be unable to turn out of the lock position.
Is it possible to rebuild an ignition switch?
Only some dealerships will rebuild an ignition switch and they often can’t for all vehicles, so rebuilding yours may not be an option. In that case, you will need to get a new switch from a manufacturer specific dealership that will also provide you with new ignition keys to match.
Where can I get an aftermarket ignition switch?
You can sometimes get aftermarket ignition switches from your local auto parts store as well. Squeeze the release pin on the ignition switch so it’s flush with the side. The same release pin that stopped the switch from coming out now needs to be pressed in so you can slide the switch into place inside the ignition module.
Where is the release pin on an ignition switch?
The new or rebuilt switch should slide easily back into its hole on the steering column. Align the shape of the cylinder and the location of the release pin with the coinciding grooves in the ignition module.
What does a negative ignition switch look like?
It will look like a black box with a positive (+) and negative (-) post sticking out of the top of it. Use an appropriate sized wrench to loosen the nut holding the cable on the negative (-) terminal and then slide it off the post. You don’t need to remove the positive cable from its terminal.
