How do you replace struts on a Chevy?
How do you replace struts on a Chevy?
Use a wrench to remove the three nuts on the top of the strut assembly connecting the strut to the frame of the car. Use a ratchet to remove the lower bolt connecting the strut assembly to the steering knuckle, and pull out the strut assembly. Repeat Steps 2 and 3 on the other side of the car.
How to replace shocks and struts in Chevrolet Impala?
Slide in the lower strut bolt, and torque it to 90 ft-lb. Repeat Steps 4 and 5 on the other side of the car. Mount the wheels back on the front of the Impala.
Do you need to remove struts on 1993 Lumina?
On a 1993 Lumina for example, you need to remove the half shaft to properly remove the strut. For this project, you will need one or more special tools to complete the job. However, you may be able to rent these special tools at your local auto parts stores, if necessary.
Where are the nuts on Chevy Silverado struts?
Reconnect the electrical connector if you have selectable ride on the Silverado, and lower the truck from the jack stands. Open the hood of the Cobalt, and remove the upper mounting nuts for the strut. They’re the three nuts surrounding the strut cap cover directly over the wheel well.
How to install or replace front struts on any vehicle?
How to Install or Replace Front Struts on Any Vehicle! (Full Guide!) – YouTube How to Install or Replace Front Struts on Any Vehicle! (Full Guide!) If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.
How do you replace a Chevy Lumina strut?
On the driver’s side, you can use a suitable pry bar. On this side, the half shaft inner joint has a groove where you can pry to separate the shaft from the transaxle. General Motors recommends installing a new half shaft nut and washer during the reinstallation process.
Can you replace the knuckle assembly on a Chevy Lumina?
Replacing the strut and knuckle assembly on your Chevy Lumina may be an involved process, if you own one of the earlier models. On a 1993 Lumina for example, you need to remove the half shaft to properly remove the strut. For this project, you will need one or more special tools to complete the job.
What are the symptoms of worn out front struts?
Here are 6 common symptoms of worn out struts: 1. Steering response is less than stellar. If you notice that the vehicle steering is sluggish, or not as responsive to input as usual, it is typically a warning sign of damaged or worn out struts.
How do you remove a strut from a spring?
Remove the large nut on top of the strut with ratchet and socket combination, and hold the strut rod with a wrench just below the strut bearing. Make a note of the strut top plate rotation before removal and reinstall in the same position. The strut can now be removed from the spring while the spring is still compressed by the spring compressor.
When do you know it’s time to replace your struts?
3. Braking problems. Because struts are a structural part of your vehicle, faulty struts can result in other problems beyond just suspension issues. You may notice that your car feels unstable, takes a nose dive or lurches forward when you brake.
When to replace springs, shocks, and struts?
It sounds like you have weak springs or struts. It is heard of for those to weaken and produce the concerns you speaketh of. Springs, shocks, or struts are suggested to be replaced every 50,000 miles.
How often should you replace your front suspension?
The best answer for this question is to follow 3 general rules of thumb: Have your struts and suspension inspected every 25,000 miles or when you notice premature tire wear. Most automotive mechanics suggest having the front suspension components inspected every 25,000 to 30,000 miles. Always replace worn struts in pairs.