How do you replace rear brakes on a Chevy Malibu?
How do you replace rear brakes on a Chevy Malibu?
Turn the keeper screw counterclockwise to release the drum. Remove the shoes by levering the long springs from the shoes’ hooks with the screwdriver, then turning the primary spring screw counterclockwise. The shoe will slide off of the brake assembly directly away from the back plate.
How do you replace a rear brake caliper?
When the rear calipers start to fail, they will need to be removed and either rebuilt or replaced. Part of the removal process is taking off the emergency brake cable, which should take about 15 minutes per side to do. Lift the rear end of the vehicle using a jack then place it on jack stands.
How do you remove the emergency brake cable from a car?
Lift the rear end of the vehicle using a jack then place it on jack stands. Unbolt the rear wheel lugs using the tire iron and take the wheels off of the vehicle. Locate the rear brake caliper. Look around the backside of the caliper to find the emergency brake cable connection, which will go through a large spring and hook onto a bracket.
How long does it take to replace a rear brake cable?
When the rear calipers start to fail, they will need to be removed and either rebuilt or replaced. Part of the removal process is taking off the emergency brake cable, which should take about 15 minutes per side to do.
How do you reset a rear brake caliper?
A rear caliper reset tool is necessary for parking brake integrated systems. The reset tool screws the piston back into the caliper. These calipers cannot be compressed with a clamping tool, it can only be reset with the reset tool. A locator slot is used on the inboard piston, which is fitted into a peg located on the backing plate of the pad.
How to replace rear brake pads and rotors?
Step 5 – Using a pair of dikes remove the rotor retainer clip which is used in initial assembly and will not be reinstalled. Step 6 – Next, use a socket to remove both upper and lower caliper mounting bolts. Use a wrench if necessary to secure the slide.
Can a brake caliper be compressed with a clamp?
These calipers cannot be compressed with a clamping tool, it can only be reset with the reset tool. A locator slot is used on the inboard piston, which is fitted into a peg located on the backing plate of the pad.
Why do rear disc brake pads wear down?
Rear disc brake pads offer improved performance and are not affected by moisture like conventional brake shoes. Brake pads wear down making a grinding noise. Caliper slides lock up, not allowing the caliper move causing premature pad wear. Inferior parts squeak, grumble and prematurely wear. Bleed brake system after the job is complete.
