How do you remove the headlights on a Ford Figo?

How do you remove the headlights on a Ford Figo?

Let’s get it done!

1. Open the bonnet.
2. You will need to locate the three screws that hold in the headlight cluster, two are on top, the other is recessed behind the grille.
3. Carefully remove the headlight cluster.
4. Locate the seal and remove.
5. Remove the wiring plug and pull out the old bulb.

How do you change the headlamp on a Ford?

Place the headlamp carefully on a flat, secure surface. The MAIN BEAM is the middle one. It has a large rubber cover. Pull off the cover. Remove the electrical connector. Turn the bulb anti-clockwise to remove it. Screw the new bulb in clockwise to secure it. TOP TIP: Try not to touch the glass. Fingerprints can shorten the life of the bulb.

How do you change the headlight bulb on a Ford Windstar?

Push the two retaining pins back into the top of the headlight assembly until they are fully seated. Lower the prop rod and close the hood. Do not touch the glass part of the new headlight bulb. The oils from your skin may cause the bulb to fail when the lights are turned on. “2003 Ford Windstar Owner’s Guide”; Ford Motor Co.; 2003

How do you change the light bulb on a Ford?

Put the new bulb into the electrical connector and put it back in the main unit. To put the lighting unit back in, reposition the headlamp unit. Make sure it goes under the bumper tab. Push the main connector back in until it clicks. Carefully align the headlamp with the bodywork. Gently push it into position.

How do you replace a 9007 light bulb?

Pull the wiring connector from the back of the headlight assembly while rotating the bulb retaining ring in a counterclockwise direction. Now pull the bulb straight out of the headlamp assembly and discard it. Grasp a new 9007 bulb by its plastic base and insert it into the hole in the rear of the headlight assembly until it is fully seated.