How do you loosen a belt tensioner bolt?

How do you loosen a belt tensioner bolt?

Turn the bolt head in the center of the spring-loaded arm of the belt tensioner counterclockwise with a ratchet and socket to loosen the bolt. The tensioner will rotate freely before it comes to a stop. When the spring-loaded arm comes to a stop, continue to turn the bolt until the bolt loosens.

How do you loosen the belt on a Ford F-150?

1. On the 4.6L, 5.4L and 6.8L engines, use a 1 / 2 drive tool or a special belt removal tool to rotate the tensioner in the proper direction as directed by the rotation arrow on the tensioner 2. While holding the tensioner back, remove the belt from around one pulley . 3. Remove the belt from around the remaining pulleys. 4.

When do you need to loosen a tensioner pulley?

Sometimes, maintenance or repair will require tightening or loosening a tensioner pulley. Replacing a drive belt or timing belt, for example, would require you to loosen a tensioner pulley to make room for the new belt, as the new belt is smaller than the worn drive belt.

How to loosen a tensioner on a car?

How to Loosen a Tensioner 1 Open the hood and locate the drive belt (s). Either locate the serpentine belt routing diagram in the engine compartment, or refer to the repair manual. 2 Determine the type of tension applied to the belt you’re replacing. 3 Locate the belt tensioner per belt routing diagram.

Can you remove a tension belt on a 2009 Ford F-150?

The one exception is if you have a 2009 and later F-150 with a 3.5L EcoBoost or 3.7L V6. Those engines have a non-adjustable tensioner. To remove the belt, you will need a stretchy belt installer/remover. Insert your 1/2″ drive ratchet or belt removal tool into the hole on the tensioner.

How do you loosen a belt tensioner on a car?

Use a ratchet and socket and turn the bracket bolts counterclockwise to loosen and remove the bolts from the belt tensioner bracket. Now, you can pull the belt tensioner straight off the engine block. Make sure that the belt stays seated inside of all of the pulleys while loosening the belt tensioner.

How do you remove a tension pulley on a Ford F-150?

To remove the belt, you will need a stretchy belt installer/remover. Insert your 1/2″ drive ratchet or belt removal tool into the hole on the tensioner. Rotate it clockwise towards the driver side to release tension. You can now release the tool and use both hands to remove the rest of the belt Figure 2.

How do you remove tension from Idler on Ford F-150?

Insert your 1/2 drive ratchet or belt removal tool into the hole on the tensioner. Rotate it clockwise towards the driver side to release tension. While holding the tool, unhook the belt from a pulley. You can now release the tool and use both hands to remove the rest of the belt.