How do you change oil in a Ford F-150?

Carefully pry the pan down at that corner with your drain pan underneath. There will be fluid going everywhere. Try to get a drain pan that is at least 18 inches wide. Keep removing the other bolts but leave them loose on one edge to hold the pan up. Tilt it more to get more oil out.

How do you change the transmission fluid in a Ford F-150?

Returning the pan to its original position. In order to perform this task, pop the hood and remove the transmission fluid dipstick. Next, use the funnel to distribute approximately 5 to 6 quarts of brand new transmission fluid.

What kind of transmission oil does a Ford F-150 use?

Ratchet, extension, and 10mm, 11mm, 18mm metric sockets 13 quarts Mercon V transmission oil (I used Castrol – part synthetic) DO NOT use Mercon or Dextron III. They are not interchangeable. Filter Kit (Fram FT1167) which comes with a gasket which you don’t need.

Where is the transmission dip stick on a Ford F-150?

This process applies to the 4R7xx family of transmissions on the F-150 as well as the newer 6R80. Ford F-250 transmissions—like the 5R110W and the 6R140—are similar regardless of engine configuration. Figure 1. The transmission fluid dip stick is visible in the engine bay on 2004-2010 F-150’s. Figure 2.

Can you change the filter on a Ford transmission?

Note that Ford does not recommend ever changing the filter. being clogged. Don’t buy a new pan gasket. The original is reusable. clamp, sized to fit over your cooler hose. There have been different size cooler lines over the years, so check before buying! those, too. your pan has a drain plug. If you are not changing the filter, jump to step 4.

What should the transmission temperature be in a Ford F-150?

Late model F-150s have the option to check transmission temperature from the information display. Temperatures between 170° and 200° are considered normal. Be sure to check your transmission fluid after driving around for a bit! Check your fluid level with the transmission dipstick after it’s warmed up.

Note the position of the OE filter, pull it off and replace it with the new one, make sure the old rubber seal comes out too. Pop the new filter in place of the old one in the same position. Use clean rags to clean the gasket mating surfaces on the pan and the transmission. The old gasket is re-usable. Place the pan back up onto the transmission.

What kind of transmission does a 1998 Ford F150 have?

Work performed on a 1998 Ford F150 4×4 with 4.6L V-8, 4R70W 4spd electronic automatic (code U in doorjamb). This tech article was originally posted at FordF150.net. It is primarily intended for Ford trucks but most likely also applies to other Ford models.

What kind of transmission does a Ford F-150 have?

If you have reached 100k miles or more and that is your reason for flushing, feel free to skip ahead to Step 2. This process applies to the 4R7xx family of transmissions on the F-150 as well as the newer 6R80. Ford F-250 transmissions—like the 5R110W and the 6R140—are similar regardless of engine configuration.

How do you change oil in a Ford F-150?