How do you change a cv shaft on a Silverado?

Step 4. Use a long pry bar between the wheel studs to keep the hub from moving as you remove the bolts from the inside half of the CV shaft. Step 5. At some point you’ll need to remove the stabilizer link for clearance.

How do you replace a CV axle in a car?

You can remove the band from the inner boot to help the old axle pass through. Insert the new CV axle into the transmission housing. Just as you removed the old CV axle, insert the new one into the same spot in the transmission housing. The peg will slide all the way in until the axle is flush against the housing.

How do you move a CV boot into place?

Step 4: Move the new CV boot into place. Notice that the smaller end of the CV boot goes on the axle shaft area and the larger opening goes over the outer CV joints. If you look closely enough, you will notice that there are grooves to indicate where the boot holds in place on both ends.

What are the symptoms of a bad cv shaft assembly?

1. Loud clicking noises when turning. One of the most common and most noticeable symptoms of a bad or failing CV axle shaft assembly is an audible clicking noise when turning.

How do you take off a CV boot?

Use the clamp cutters to remove the metal clamps. There is one clamp on each end of the rubber boot. Tip: If you look closely, there will be grooves on the axle and CV joint area to specify where the boot and clamp hold down to. Step 2: Cut off the old rubber boot.

How do you replace the front axle on a Chevy Silverado?

You are hammering the spindle to break the splines of the shaft loose from the hub. There are six 15mm bolts on the axle flange at the differential. Since your truck is jacked up, when applying rotational force to the heads of the bolts, the wheel will be able to spin freely on its axis.

How do you change a cv shaft on a Silverado?