How big is the socket for the fuel filter?
How big is the socket for the fuel filter?
They’re the same exact cap. +1 for the 36mm socket. I use it for both. The 2nd fuel filter is 15/16″. Do NOT use the 1/2″ drive socket to open the 2nd one, or you will probably break the cap. I broke mine this way, as did about 3 other people I know.
What do I need to change fuel filter?
Caution: Fuel filter housing is filled with fuel. Tools and Materials: Socket wrench for fuel filter caps: – 36mm socket (primary filter) – 24mm socket (secondary filter) fuel filter kit with Motorcraft O-ring included (FD-4609) Oil resistant gloves Paper towels Large collecting basin Turkey baster
Where is the fuel filter on a F-250 Super Duty truck?
For 2008 MY and later F-250 through F-550 Super Duty Trucks with the 6.4L DIT Power Stroke Diesel Engine Primary Fuel Filter Location under driver’s side frame 1. With a basin positioned below the fuel/water drain port, open fuel/water drain until water/fuel mixture stops. Note: Dispose of fuel properly.
How to change the fuel filter on a 6.4L Power Stroke Diesel?
6.4L DIT Power Stroke®Diesel Engine Fuel Filter Change Guide Secondary Fuel Filter Location 1. Remove fuel filter cap. Use a 24mm socket or 1/2 inch square drive 3. Remove excess fuel from housing with turkey baster. Note: Dispose of materials properly. 4.
How do you replace the fuel filter on a Ford truck?
Using a 36 mm wrench, carefully remove the primary fuel filter cap along with the O-ring, and replace it with the new primary cap from the complete fuel filter kit. The new cap should snap right into place in just a few seconds.
They’re the same exact cap. +1 for the 36mm socket. I use it for both. The 2nd fuel filter is 15/16″. Do NOT use the 1/2″ drive socket to open the 2nd one, or you will probably break the cap. I broke mine this way, as did about 3 other people I know.
How do you change the fuel filter cap?
Figure 1. Filter drain port location. Figure 2. Draining the fuel. Using a 36 mm wrench, carefully remove the primary fuel filter cap along with the O-ring, and replace it with the new primary cap from the complete fuel filter kit. The new cap should snap right into place in just a few seconds.
For 2008 MY and later F-250 through F-550 Super Duty Trucks with the 6.4L DIT Power Stroke Diesel Engine Primary Fuel Filter Location under driver’s side frame 1. With a basin positioned below the fuel/water drain port, open fuel/water drain until water/fuel mixture stops. Note: Dispose of fuel properly.
