Common questions

Can a passenger side window be controlled from the driver side?

Can a passenger side window be controlled from the driver side?

After the jump start the passenger window stopped working. It works fine from the passenger side switch. Any ideas? I’d rather avoid a trip to the dealer if possible. Thanks. My passenger side front window can no longer be controlled from the driver’s side.

Why is my driver’s side window not working?

The driver’s side window motor may have gone out, or there should be a short or bad connection in the switch. You could try taking the door card off and inspecting the window switch connector. I’ve had luck in the past just unplugging and plugging it back in when my passenger window was working intermittently.

How does a power window work in a car?

Every power window requires a window motor to supply the electrical energy. There is a gear at the end of the power window motor which connects with the window regulator. When you press the up or down button on your door, it activates the window motor which then allows the window regulator to move the window.

Why is the side of my car door not working?

The switch on the side of your door may not be functioning properly. Each time you press down on the up or down part of the switch, it wears the switch out just a little bit more. If you press it too aggressively or use it on a regular basis, there may come a point when the switch stops working properly.

After the jump start the passenger window stopped working. It works fine from the passenger side switch. Any ideas? I’d rather avoid a trip to the dealer if possible. Thanks. My passenger side front window can no longer be controlled from the driver’s side.

Is the front passenger window raised or lowered?

The front passenger window can be raised, but not lowered, from the driver’s side. The button on either driver or passenger side is not fully AUTO. I have tried various suggested methods to reinitialize the passenger side, but to no effect. I have also disconnected and reconnected the battery, thinking it may automatically reinitialize.

How many volts does the passenger side window have?

So, the white / yellow and the tan / light blue will have 0 volts with both switches released, as you found. The red / light blue is a different story. That is the 12-volt feed only for when the passenger switch is pressed. It is not used when the driver’s switch is pressed.

How do you open the front passenger window in a Subaru?

Anti-entrapment function (driver’s and front passenger’s windows) Initialize the power window in the following procedure to reactivate such functions. 1. Close the driver’s door. 2. Turn the ignition switch to the “ON” position. 3. Open the driver’s side window halfway by pushing down the power window switch.

Why is my front passenger window not working?

Following the battery being replaced, the driver switches commanding all 4 windows failed to control the front passenger window. Upon reaching across the passenger seat, I found the passenger door switch still was able to command the window down.

Are there any non driver side windows that work?

All 3 non-driver side windows do not lower from the driver side door controls. In addition, I tried the front passenger window switch as well and that didn’t work either.

What do you do when your car windows stop working?

The lockout switch on the drivers controls stops all windows working except the drivers window, even from the driver’s controls. Honda and Toyota used to be able to wire electric windows properly, I assume they still can in their recent cars. Thank you so much, the switch was exactly what it was.

Why does the passenger side window not work?

The red / light blue is a different story. That is the 12-volt feed only for when the passenger switch is pressed. It is not used when the driver’s switch is pressed. This is why I suspect you have two problems, since the window doesn’t work from either switch.

Why are my front and rear windows not working?

All 3 non-driver side windows do not lower from the driver side door controls. In addition, I tried the front passenger window switch as well and that didn’t work either. The driver’s window control works perfectly. I have not tried the rear windows from the rear door controls.

All 3 non-driver side windows do not lower from the driver side door controls. In addition, I tried the front passenger window switch as well and that didn’t work either.

The lockout switch on the drivers controls stops all windows working except the drivers window, even from the driver’s controls. Honda and Toyota used to be able to wire electric windows properly, I assume they still can in their recent cars. Thank you so much, the switch was exactly what it was.

What to do if your car window won’t go down?

When you reverse window direction, the polarity on the wires switches. To test the switch operation set your digital voltmeter to 20 volts or less DC. Place the positive test lead in one connector cavity and the negative lead in the other cavity and operate the switch up and down.

Why is the passenger window not working on my Subaru Outback?

Upon reaching across the passenger seat, I found the passenger door switch still was able to command the window down. This proved the window motor and associated circuitry still worked normally. It seemed like swapping out the battery in the engine bay induced this niggling failure. Fortunately, I was near my Subie dealer.

Following the battery being replaced, the driver switches commanding all 4 windows failed to control the front passenger window. Upon reaching across the passenger seat, I found the passenger door switch still was able to command the window down.

When you reverse window direction, the polarity on the wires switches. To test the switch operation set your digital voltmeter to 20 volts or less DC. Place the positive test lead in one connector cavity and the negative lead in the other cavity and operate the switch up and down.

Upon reaching across the passenger seat, I found the passenger door switch still was able to command the window down. This proved the window motor and associated circuitry still worked normally. It seemed like swapping out the battery in the engine bay induced this niggling failure. Fortunately, I was near my Subie dealer.

Where are the 12 volts at the passenger switch?

That leads to point “D”, and that is where you’re missing the 12 volts at the passenger’s switch. That’s the lower red arrow in diagram number two, the second one below. You have 12 volts at the splice but not at the next test point, the switch.

How do you change the direction of a motor?

Basically, both motor wires are grounded through both switches, then, when you want to activate a direction, that one switch contact moves away from its ground connection, then gets 12 volts applied to it as the switch continues to move. That’s how they change the polarity from either switch to change the direction the motor runs.

What does it mean if your passenger side window switch has failed?

It means that the passenger side window switch has failed. The fact that the drivers switch operates the window properly lets you know that the window components all function properly as that the problem is probably electrical.

Is the passenger side window switch still under warranty?

Given that you are still under warranty, this scenario should be something the dealership would resolve free of charge as part of the warranty.

Are there any windows that work from the driver side?

All the other windows that are controlled from the drivers side are directly controlled via relays and fairly conventional wiring.

The front passenger window can be raised, but not lowered, from the driver’s side. The button on either driver or passenger side is not fully AUTO. I have tried various suggested methods to reinitialize the passenger side, but to no effect. I have also disconnected and reconnected the battery, thinking it may automatically reinitialize.

Front passenger window not working, not getting power to the switch either. The other three windows work great. Which color is the power for the passenger side? Where do I start? have the same problem?

All the other windows that are controlled from the drivers side are directly controlled via relays and fairly conventional wiring.

Why is my passenger window not working but the driver window is working?

When passenger windows don’t work, but the driver’s window does, chances are high that you’ve got a bad master switch in the driver’s door or a broken wire in the driver’s door hinge area. Second: Power window motors only have two wires.

Where are the side windows on a car?

These auto glass panes are located on the sides of the vehicle in the doors. Side windows can take many shapes and sizes and either sliding or stationary. Most modern cars have an electric motor that “rolls” the window pane up and down, using a switch controlled by the passenger.

How does a car window roll up or down?

Most modern cars have an electric motor that “rolls” the window pane up and down, using a switch controlled by the passenger. Older cars required a crank to roll down the window and only the driver and front passenger windows would roll fully into the door of the car. What type of glass is used in car windows?

What kind of glass is used in a car side window?

Older cars required a crank to roll down the window and only the driver and front passenger windows would roll fully into the door of the car. What type of glass is used in car windows? Car and truck side windows are made of tempered glass, while others are laminated.

Where are the side window glass panes located?

A guide to side car window glass. These auto glass panes are located on the sides of the vehicle in the doors. Side windows can take many shapes and sizes and either sliding or stationary. Most modern cars have an electric motor that “rolls” the window pane up and down, using a switch controlled by the passenger.

Is there a problem with the passenger side window switch?

I have noticed a problem with my passenger side window switch. It will roll the window down, but it won’t roll the window back up. I can only roll the window back up using the switch on the driver’s side. In the past, I have taken the trim off of both doors to work on the speakers and apply some Dynamat.

So, the white / yellow and the tan / light blue will have 0 volts with both switches released, as you found. The red / light blue is a different story. That is the 12-volt feed only for when the passenger switch is pressed. It is not used when the driver’s switch is pressed.

I have noticed a problem with my passenger side window switch. It will roll the window down, but it won’t roll the window back up. I can only roll the window back up using the switch on the driver’s side. In the past, I have taken the trim off of both doors to work on the speakers and apply some Dynamat.

Front passenger window not working, not getting power to the switch either. The other three windows work great. Which color is the power for the passenger side? Where do I start? have the same problem?

How can I control the passenger side window?

Then pull up on the switch to roll the window all the way up, and keep the switch up for an additional 3 seconds. Following this reset, the driver’s switches were able to command the passenger side window once again.

Why does my window only work in one direction?

When a window doesn’t work in only one direction and only from one switch, the culprit can be either switch, the driver’s or that passenger’s switch. That’s hard to understand at first, but there’s actually four sets of contacts in each switch, and two are in play in both switches, regardless which one is pressed.

How to test left front driver side window?

3 Ensure left front window switch on master switch assembly is in neutral position. Connect a test light between battery voltage and master switch assembly connector C1 terminal “M” (Black wire). If test light illuminates, go to next step.

What to do if left front window does not work?

Disconnect left power window motor connector. Ensure ignition switch is in “run” position. Connect a test light between left power window motor connector terminals “A” (dark blue wire) and “B” (brown wire). Observe test light while operating left front window switch on master switch assembly to UP and DOWN positions.

Why is my car window not rolling up?

1) Bad Window Regulators The mechanism that allows a power window to move up and down is called a window regulator. Each car door with a power window has a window regulator to move it. If the regulator goes bad, then pushing the up or down button will not make the window move.

Why is my power window not working?

Power windows can stop working without warning. The most common cause of this is because their regulators and motors are used more often than other features of the vehicle. If your power windows have stop working, have them checked out by a mechanic as this is a safety issue.

Why do my power windows sometimes stop working?

Common Causes of Power Windows Not Working Bad Window Regulators The mechanism that allows a power window to move up and down is called a window regulator. Bad Window Motor Every power window requires a window motor to supply the electrical energy. Snow and Ice If you live in a region with a lot of snowy and icy conditions, this could compromise the functionality of your power windows.

How do you fix a stuck car window?

Follow this procedure to fix sticking car windows: 1) Roll the window all the way down. 2) Spray the silicone lubricant between the rubber channel. 3) Roll the window back up. 4) spray the silicone lubricate on the edges of the seal. 5) Wipe the excess lubricant. All Done! Scotty Kilmer explains it well in this video:

When a window doesn’t work in only one direction and only from one switch, the culprit can be either switch, the driver’s or that passenger’s switch. That’s hard to understand at first, but there’s actually four sets of contacts in each switch, and two are in play in both switches, regardless which one is pressed.

The driver’s side window motor may have gone out, or there should be a short or bad connection in the switch. You could try taking the door card off and inspecting the window switch connector. I’ve had luck in the past just unplugging and plugging it back in when my passenger window was working intermittently.

Why is the driver side door lock not working?

Did a search and didn’t see anyone else with this issue. 2014 Laramie drivers door won’t lock pushing button on handle or unlock sticking your hand inside handle. Passenger side works perfect.

What to do if power window does not go down?

Check the power locks, all connections and fuses. Next check the power window master switch which controls the movement of all four power windows. Chances are this will need to be replaced as it could well be faulty. How to repair an XG350 power window which does not go down and does not operate either of the switches?

Why do I need a power window in my car?

Virtually every new vehicle made today contains power windows. These are basically electric windows which require electrical power in order to function properly. It is very convenient to operate a power window because you just need to push a button on your door to open and close it.

How to fix power window since it can go down but?

Change master switch and passenger switch and the window regulator checked all the fuses still not working. Definitely confuse Master switch does not work at all for the passenger window all other windows work. The driver side window switch works but only goes up not down. Any other suggestions? Was this answer helpful?

What to do if your front window won’t go down?

I have a 2004 Honda CRV passenger front window goes up won’t go down. Change master switch and passenger switch and the window regulator checked all the fuses still not working. Definitely confuse Master switch does not work at all for the passenger window all other windows work. The driver side window switch works but only goes up not down.

What is the Dorman front driver side power window regulator?

Customer Review: Dorman 741-644 Front Driver Side Power Window Regulator and Motor Assembly for Select Cadillac /… The original equipment window regulator fails when the cable binds because it has poor tension. This Dorman OE FIX replacement regulator incorporates cable tension springs to resist cable reel binding.

Author Image
Ruth Doyle