Can a DTC c102b right rear wheel speed sensor reset?

Road test the vehicle over 40 km/h (25 mph). Vehicle must be driven above 40 km/h (25 mph) for set conditions to be met. With the scan tool, read ABS DTC. Did DTC C102B-Right Rear wheel speed sensor circuit reset ?

Where is the ABS speed sensor on a truck?

Some older vehicles, trucks with solid axles in particular, will have them mounted on the rear differential. The ABS speed sensor is just a magnetic sensor that induces a voltage as the tone ring slots or ridges pass through the magnetic field of the sensor.

What’s the best way to replace an ABS sensor?

Tip: When removing the sensor from its mounting or housing, you may need to apply some spray penetrant. Once you have applied the penetrant, rotate the sensor to break it free. Be gentle and patient. Once it begins to rotate, slowly and firmly pull up on the sensor. Often, you can use a flat head screwdriver to help with the lifting.

What is the code for right rear wheel speed sensor?

C102B-Right Rear Wheel speed sensor circuit – The Electronic Stability Control (ESC) may also be referred to as Electronic Stability Program (ESP) depending on the vehicle model year and configuration. Certain components may also reference ESP, ESC, or use the traction control symbol. Possible causes C102B code

What to do if ABS wheel speed sensor goes out?

If the ABS wheel speed sensor was faulty, once the new hub/sensor is installed, and you drive the vehicle, the warning lights should go out. To determine what is going on, you can manually erase the trouble codes using an appropriate scan tool and if the warning lights stay off, then the problem is resolved.

Is the right rear wheel speed sensor active?

Right Rear Wheel Speed Sensor (WSS). Antilock Brake System (ABS) Module. This DTC must be active for the result of this test to be valid. Turn the ignition on, with the scan tool, record and erase DTC. Cycle the ignition switch from off to on, with the scan tool, read DTC. Does the scan tool display C102B-Right Rear wheel speed sensor circuit ?

Is the antilock brake system ( ABS ) active?

Antilock Brake System (ABS) Module. This DTC must be active for the result of this test to be valid. Turn the ignition on, with the scan tool, record and erase DTC. Cycle the ignition switch from off to on, with the scan tool, read DTC.

Can a DTC c102b right rear wheel speed sensor reset?