How much torque does a CAT C13 have?

How much torque does a CAT C13 have?

Power Rating

How much horsepower does a C 13 CAT engine have?

380-430 horsepower
The Caterpillar C13 is an inline-6 diesel internal combustion engine made by Caterpillar. The engine is 12.5 liters in displacement (763 cubic inches). The cylinder size is 5.12 x 6.18 bore/stroke. The engine can produce 380-430 horsepower at 2100 RPM.

How much horsepower does a CAT C 12 have?

The horsepower of the C12 is 430 (mph) change to (HP). The peak torque rating of this engine is 1,650 ft-lb at 1,200 rpm, with the torque rise percentage at 53 percent. This engine is air and liquid cooled, and the cooling system holds 2.7 gallons of coolant. While the lubricating oil system can hold up to 9.4 gallons.

Is a Cat C-12 A good engine?

C-12 is a good motor. Expect to do a head gasket and Cam/Followers between 750 and 1 million. These problems are common, ask around and you’ll find out. Other than that, a good engine, the fixes are out so you will really only have to do them once.

How much torque does a cat C 13 have?

Torque. As with horsepower, the C13’s torque production varies depending on how it is installed. At the lowest end of power, it still generates 1,150 foot-pounds of torque. 525 horsepower installations, though, result in the C13 outputting 1,750 ft-lb of torque. In either case, it produces its maximum torque at a relatively low speed of 1,200 rpm.

How does the Caterpillar C13 diesel engine work?

Caterpillar designed the C13 to meet the Environmental Protection Agency’s 2007 standards for reduced emissions. One of its key features is a diesel particulate filter, or DPF, which captures soot particles and uses a self-regeneration system to automatically burn off the collected soot.

Do you need torque specs for a C15 Acert?

Vocational, Technical or Tra… I need the torque specs for a c15 acert? It is a nxs c15 acert 475hp cat. I’m doing the stud up grade on the rocker shafts. I need the specs for the three studs on the rocker shaft ,the one taper stud … read more

How much horsepower does a cat C3 engine have?

Horsepower. Depending on the application and the installation, the C13 can produce as little as 350 and as much as 525 horsepower when running at 2,100 rpm. Applications such as vocational trucks and buses require the least power, typically falling between 305 and 370 horsepower while fire trucks and recreational vehicles typically require…

What are the bolt torques on a Cat C13?

CAT C13 Main Bearing Bolts S/N – JAM1-UP S/N – KCA1359-UP S/N – KCB6818-UP step 1 = 150 +- 7 Nm, 110 +- 5 lb.ft step 2 = + 60 degrees S/N – KCA1-1358 S/N – KCB1-6817 step 1 = 50 +- 5 Nm, 110 +- 4 lb.ft step 2 = + 60 degrees Click for CAT C13 engine manuals and specs

What are the specs of a Caterpillar CAT C 13?

1 Physical Specifications. Weighing 2,610 lb, the C13 has a displacement of 12.5 L. 2 Emissions. Caterpillar designed the C13 to meet the Environmental Protection Agency’s 2007 standards 3 Horsepower. Depending on the application and the installation, 4 Torque. As with horsepower, the C13’s torque production varies depending on

Horsepower. Depending on the application and the installation, the C13 can produce as little as 350 and as much as 525 horsepower when running at 2,100 rpm. Applications such as vocational trucks and buses require the least power, typically falling between 305 and 370 horsepower while fire trucks and recreational vehicles typically require…

What is the torque spec for the flywheel, vibration damper?

C15: the flywheel, vibration damper and the pressure plate on cat… Vocational, Technical or Tra… I need the torque specs & overhead adjustment procedure for a 2004 year C 13 Acert Cat.