How do you Prime the fuel filter on a Caprice?

Prime the fuel filter with fuel by turning the key on and off three times. Then, crank the engine. Inspect the new fuel filter around the fuel lines for gas leaks while the engine is running. Turn the engine off. Jack the rear of the Caprice back up and remove the jack stands.

Where does the gas go in a Caprice Classic?

The Chevrolet Caprice Classic has an in-line fuel filter that keeps any trash and sediments in the fuel from entering the engine. The gas travels into the fuel filter from the gas tank. When the gas reaches the fuel filter, the gas travels through the fibers inside of the fuel filter.

How do you get a fuel line out of a fuel filter?

Compress the plastic clips with your fingers until the fuel line unlocks from the fuel filter. Then, pull the fuel line off the fuel filter. Do this to both fuel lines. Loosen the nut from the bracket bolt until the fuel filter is loose enough to slide out of the bracket. Slide the old fuel filter straight out of the round bracket.

Where is the arrow on the fuel filter?

Position the fuel filter so that the arrow that is stamped on the fuel filter is facing the engine. Tighten the nut until the clamp is tight over the fuel filter. Push both of the fuel lines onto the fuel filter until you feel the plastic clips lock onto the fuel filter.

Where is the fuel filter on a Caprice?

Slide under the driver side of the Caprice between the driver-side door and the driver-side rear tire. Locate the round fuel filter that is attached to the driver-side frame rail. The round fuel filter is housed inside of a round bracket and has one fuel line coming out of each end of the filter.

How do you replace the fuel filter clips?

Locate the clips on either side of the cylindrical fuel filter, then use a flat head screwdriver to pop them out of the holes they are in. These clips may break as you remove them, so purchasing replacement clips along with your fuel filter is advised.

How is the fuel line attached to the fuel filter?

Fasten the fuel filter to the fuel line. Slide the fuel lines onto the front and back of the filter the same way they were attached to the old one. With the fuel line in place on the filter, slide the plastic clips through the holes on the fuel line nozzle to secure the line in place on the fuel filter.

How to change a fuel filter on a 1990 Chevy?

How to Change a Fuel Filter on a 1990 to 2003 Chevy or GMC. – YouTube If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.

How do you remove fuel lines from a fuel filter?

Remove the fuel lines from the filter. With the clips removed, slide the fuel lines away from the filter to pop them off of the nozzles on either end. Make sure to tip the fuel lines toward the bowl or bucket in place as you remove them to catch any spilled gasoline.

How do you remove gas cap from Caprice Classic?

Remove the gas cap from the tank. This will remove the pressure from the fuel filter. Jack the rear of the Chevrolet Caprice Classic up and put the jack stands on both sides of the car. Position the jack stands under the frame rail directly in front of both rear tires. Lower the Caprice onto the jack stands.

When to replace the fuel filter on a GMC?

1990-2008 CHEVY GMC GM FUEL FILTER REPLACEMENT | Save fuel lines and brackets like a professional! – YouTube If playback doesn’t begin shortly, try restarting your device.

How do you put a new fuel filter in a car?

Slide the old fuel filter straight out of the round bracket. Put the old filter into the fluid catch pan. Push the new fuel filter into the round bracket. Position the fuel filter so that the arrow that is stamped on the fuel filter is facing the engine. Tighten the nut until the clamp is tight over the fuel filter.

How do you Prime the fuel filter on a Caprice?