Can a Ford 460 be swapped for a 429?

Swapping a 460/429 into your 79 and older Ford can be really easy or really hard depending on your parts availability and your specific truck. Ford only offered 460s in 2wd trucks from 73-79 a 460 never came in a 4wd or in a truck with a 4spd.

Can a Ford truck have a 460 motor?

They also can come from an 80-up Ford truck that had a 460 motor. If you are using a car motor the driver’s side exhaust manifold is the same as a truck the passenger side car manifold does not fit and requires cutting the frame which then leads to a broken frame.

What do I need to swap a 460 V-8?

A/C can make the swap even harder. You will need a Transmission or a Bell housing from a 351M or 400. If your truck is auto you will just use a normal C6 trans and converter from the Modified motor and use a stock 460 flex plate.

What kind of crankshafts do I need for my car?

SCAT CRANKSHAFTS OFFERS A COMPLETE LINE-UP OF CRANKSHAFTS FROM STOCK REPLACEMENT TO CUSTOM BILLET, I-BEAM AND H-BEAM CONNECTING RODS AND COMPLETE ROTATING ASSEMBLIES FOR CHEVY, CHEVY LS, FORD, FORD MODULAR, FORD VINTAGE, CHRYSLER, MODERN HEMI, PONTIAC AND SPORT COMPACT.

Is there a swap kit for a Ford 460?

Ford only offered 460s in 2wd trucks from 73-79 a 460 never came in a 4wd or in a truck with a 4spd. The swap can be performed with aftermarket parts or a factory parts depending on what your preference is. A whole swap kit can be ordered online to simply bolt a 460 in however the kit is around $1800.

Where to buy crankshaft kit for Ford F150?

Place your order for your crankshaft kit for Ford F150 online from AutoZone and select home shipping or Same Day Store Pickup at your closest store. Ask our friendly and helpful staff questions about your automotive installations and borrow tools from our handy Loan-a-Tool program to save you money.

They can come from a Ford Van that had a 460 or a 2wd Ford truck with a 460. They also can come from an 80-up Ford truck that had a 460 motor. If you are using a car motor the driver’s side exhaust manifold is the same as a truck the passenger side car manifold does not fit and requires cutting the frame which then leads to a broken frame.

Where was the Ford 460 V8 engine made?

Beginning in 1968, the Ford 460 was manufactured at Ford’s plant in Lima, Ohio. A stock 460 cylinder bore was measured at 4.36 inches and had a 3.85 inch stroke with a rod length of 6.605 inches which would create a nice rod length to stroke ratio of 1.71:1.

What kind of motor does an EFI 460 have?

I am going to try to keep this project up to date and limit the number of pictures I post to keep the speed up, even though I have hundreds of pictures to choose from. I am doing a swap from a 1978 400 motor to a EFI 460 from an 88 E350 van.

Which is better a Ford Bronco or a Ford 460?

Another alternative to the Pickups and Vans is to buy a 429 or a 460 out of a 1968 to 1978 full-size Ford, Lincoln, or Mercury passenger car. While these engines will require you to locate a few more parts than the Van & Truck engines, they are far more plentifuland are often in better shape.

Can a F250 fit in a 4×4 frame?

A F150 4×4 or Bronco are second being most of the factory parts off a 2wd will fit right in the ½ ton 4×4 frame. Last a F250 or F350 4×4 is the hardest being the steering box is on the inside of the frame as opposed to the outside like the ½ ton.

Which is the hardest Ford truck to swap?

Last a F250 or F350 4×4 is the hardest being the steering box is on the inside of the frame as opposed to the outside like the ½ ton. In addition to the swap you must also consider Air Conditioning if you truck has it. A/C can make the swap even harder.

How much does a Ford 460 crate engine cost?

Ford 460ci 406 HP: from $4895 for a crate engine; $5895 for a turnkey engine, depending upon parts used. Parts must be able to match HP application. (This engine comes with the Pertronix distributor and coil. The MSD 2 or MSD 3-pack distributor and coil is extra.)

How big are the Pistons on a Ford 460?

SEAL POWER PISTONS 9.1 compression. New Edelbrock RPM dual plane intake manifold. Large 460 Beam forged rods, size 6.605, with ARP rod bolts. NODULAR CRANK Pro Turn micro polished.

How to rebuild and modify Ford C4 and C6 automatic transmissions?

This Tech Tip is From the Full Book, HOW TO REBUILD & MODIFY FORD C4 & C6 AUTOMATIC TRANSMISSIONS. For a comprehensive guide on this entire subject you can visit this link: SHARE THIS ARTICLE: Please feel free to share this post on Facebook / Twitter / Google+ or any automotive Forums or blogs you read.

What are the bolt patterns on a Ford I6?

200 I6 1978-1983 only, partial (4 of 6 bolts) pattern. Named after the 1962 Ford Taunus V-4 built in Cologne, Germany. 1.2/1.3/1.5/1.7L were mostly in European Cars. 1.8, 2.0/2.3 had the same bellhousings bolt patterns with differences from year to year to be wary of.

When did the Ford 460 engine come out?

The Ford Motor Company installed the 460-cubic-inch engine in vehicles from 1968 through 1996. When you endeavor to rebuild a 460 V8 engine, you will need to ensure all of the bolts are torqued properly so your hard work lasts for years.

What’s the difference between Ford 460 and Ford 460 short block?

The early motors featured cylinder heads with smaller (74-77cc) combustion chambers versus 90cc for the later heads. Smaller chambers equal higher compression which, in turn equals more power. Don’t be above playing musical heads, as the pre-72, small-chamber heads will really wake up an EFI 460 short block.

What are torque specifications for Ford 460 V8?

When you endeavor to rebuild a 460 V8 engine, you will need to ensure all of the bolts are torqued properly so your hard work lasts for years. Each component installed on the interior and exterior of the engine has specific torque specifications that will keep mounting bolts tight for the life of the engine.

What kind of transmission fluid does a 1977 Ford C6 use?

If the trans is a 1977 up, it should use the Dexron/Mercon spec fluid. You should also find this on the dipstick. The current version of this is the Dexron III/Mercon spec. Do not use the Mercon V spec in the C6. >>I got a 1979 F150 with a 400 engine. 4WD pickup. >>The transmission is a C6. I am hoing to change the filter and fluid.

Can a Ford C-6 be swapped into a C-4?

When swapping into some Ford C-4 applications, it will be necessary to move the crossmember back about two inches. The C-6 has a bulky case, and it may be necessary to modify the shifter tunnel on C-4 equipped cars to accommodate the C-6 shifter linkage.

What kind of EFI do I need for MY 1992 Ford 460?

I would highly recommend this product to anyone. Just installed the Twisted smog box with all the smog elimination hardware on my 1992 F-250 460.

What makes a car run bad in the 79’s?

Most ’79 cars run pretty lousy as they age, so could be a lot of things. Most common problems would suggest a vacuum leak in hoses, intake manifold or carb base plate. Also the EGR valve is suspect, and the carburator itself. With so few miles, lots of things can get gummed up, and gaskets can shrink and leak as well.

What kind of engine does a Ford 429 have?

1967-76 F250/350 4WD Trucks equipped with 360/390 engines and C-6 automatic transmission 1980-96 Trucks and Broncos 2WD and 4WD equiped with 6-cylinder engines and C-6 automatic transmission 1980-96 Trucks and Broncos 2WD and 4WD equipped with 6-cylinder engines and all standard transmissions TO A 429/460 ENGINE.

How much does a Ford 460 engine cost?

Ford 460ci 452 HP: from $6495 as a turnkey engine, depending upon parts used. Parts must be able to match HP application. Parts must be able to match HP application. — 460 ft/lbs torque

What kind of head does a Ford 460 have?

The OEM heads on a 460 are a bit of a mixed bag when it comes to performance. The intake side of the head provides a cross-sectional oval port which helped give the engine the high torque ratings that it was known for.

Where was the Ford 460 big block engine made?

These two engines proved to be the last of Ford’s V8 big block engines but are still quite popular today among engine enthusiasts. Beginning in 1968, the Ford 460 was manufactured at Ford’s plant in Lima, Ohio.

Can a Ford 460 be swapped for a 429?