Will a C6 transmission fit a 351M?

New Member. If you have a small block C6, it will fit the 351c/w. It will also fit 302/289’s as well as other small blocks.

What kind of transmission do I need for a 429 Ford?

The C-6 is a good transmission choice to use for installing a 429 or 460 engine into earlier Ford models, too. The 31-spline output slip yoke required to hook your driveshaft to the C-6 is Ford part number C7SZ-4841A. This yoke accommodates either a Spicer 1330 series u-joint.

How big is a Ford C 6 transmission?

Most donor cars will have an engine size over 351 cubic inches, up to 460 cubic inches; however, you will find some C-6 transmissions behind small-block Fords, especially in truck applications. Because of the C-6 transmission’s strength, you will find many of these units in four-wheel-drive applications.

Where was the Ford C6 automatic transmission made?

The transmission was produced in Livonia, Michigan for much of its production life, until being moved to Sharonville, Ohio in the 80s. The C6 transmission is called by many the best automatic transmission that Ford ever built. The transmission was very popular thanks to its strength and durability, being called indestructible by many.

Is there an AOD for a 1978 Ford Bronco?

Since there are still only six gear shift detents, we can retain the ’78-’79 Bronco automatic column shifter. We will be retaining modifications to them. For the AOD, we need to modify the C-6 bracket that the frame mounted bellcrank rod pivots on. Unbolt the bracket (two bolts) from the C-6.

Which is transmission fluid does my 1978 F-250 take?

Click to expand… My 1978 F-250 400 W/ A C6 Takes dextron. It works fine that is what the stick number and owners. Truck shop manual l said to use. I think 77 was the first year for the Dextron change from Type F. it has worked fine for years and many miles.

What kind of transmission does a Ford C-6 use?

Many ’60s and ’70s Ford owners can benefit from the use of the C-6 automatic transmission. The C-6 is a very strong transmission and was originally used in many V-8 Ford passenger cars, as well as many pickup truck applications.

What kind of transmission fluid does a 1977 Ford C6 use?

If the trans is a 1977 up, it should use the Dexron/Mercon spec fluid. You should also find this on the dipstick. The current version of this is the Dexron III/Mercon spec. Do not use the Mercon V spec in the C6. >>I got a 1979 F150 with a 400 engine. 4WD pickup. >>The transmission is a C6. I am hoing to change the filter and fluid.

Will a C6 transmission fit a 351M?