How do you remove the ignition switch from a Mercedes?
How do you remove the ignition switch from a Mercedes?
Remove the two 13 mm bolts on top of the steering column. This will allow the steering column to drop down roughly 3 inches so that you can access the release button for the ignition switch. Press the release button on the steering column where the ignition cylinder enters the column.
Where is the ignition plug on a Mercedes?
Turn the ignition key to the “I” position and remove the electrical plug in the back of the ignition switch. The switch should be exposed now that the cowl and instrument cluster have been removed. You will access the plug from the top of the ignition switch and cylinder assembly.
How do you lock the ignition switch on a Mercedes SLK?
Alternately, it can be pried off carefully using a small flatblade screwdriver. For reassembly, the ring’s clips (arrow) grab the slot in the dash panel directly under the key cylinder. The special Lock Cover Tool catches the key’s remote fob, causing the key to move with the tool.
How do you remove ignition switch lock cylinder?
Removing the cylinder is the recommended way to thoroughly clean it, as opposed to blasting brake cleaner into the dash panel. The removal process is fairly straightforward. The aluminum cylinder cover ring needs to be rotated a quarter turn counter-clockwise while the key is in the “1” (Accessory) position.
Remove the two 13 mm bolts on top of the steering column. This will allow the steering column to drop down roughly 3 inches so that you can access the release button for the ignition switch. Press the release button on the steering column where the ignition cylinder enters the column.
Turn the ignition key to the “I” position and remove the electrical plug in the back of the ignition switch. The switch should be exposed now that the cowl and instrument cluster have been removed. You will access the plug from the top of the ignition switch and cylinder assembly.
Alternately, it can be pried off carefully using a small flatblade screwdriver. For reassembly, the ring’s clips (arrow) grab the slot in the dash panel directly under the key cylinder. The special Lock Cover Tool catches the key’s remote fob, causing the key to move with the tool.
What kind of Screws do I need to replace my W203 ignition switch?
Remove the three T20 Torx screws holding the lower panel to the dash (red arrow) along with the one T20 screw (yellow arrow) holding the dash. Note: a previous owner had replaced some of the Torx screws with household Philips screws.
