How do you Bleed the brakes on a Jaguar XKE?
How do you Bleed the brakes on a Jaguar XKE?
The front calipers are easy because they are so accessible. The rear brakes are another story. Because they are inboard and due to the geometry of the rear suspension the simplest way to do it is to remove the forward shock and spring combination. Really, there is no other way to work the bleed valve properly.
How do you repair a 1967 Jaguar XKE?
Installation – Place caliper in position, install shims, if equipped, secure bolts and lock with wire. Connect fluid line and bleed brakes. Removal (Rear) – Remove rear suspension unit. With rear suspension removed, remove hand brake carrier as previously outlined.
How do you remove a caliper on a XKE?
Removal (XKE Rear) – Remove rear seat cushion on both caliper inspection covers for access to rear calipers. Remove clips retaining pins, and withdraw pads. Installation – Draw out half the reservoir fluid if pistons are to be pushed back within cylinders. Install new pads, pins, and clips.
What to do about bleeder screw on XKE?
Keep hydraulic fluid reservoirs filled with clean brake fluid during bleeding operation. Attach a bleed tube to bleeder screw on left-reaer brake caliper, and immerse opposite end of tube in a container partially filled with brake fluid. NOTE – On XKE, remove rear seat for access to rear brake caliper bleeder screws.
Installation – Place caliper in position, install shims, if equipped, secure bolts and lock with wire. Connect fluid line and bleed brakes. Removal (Rear) – Remove rear suspension unit. With rear suspension removed, remove hand brake carrier as previously outlined.
How to remove hand brake pads from a Jaguar XKE?
Removal (All Exc. XKE) – Disconnect hand brake cable levers from hand brake pad carriers. Remove bolts holding carrier refraction plate. Remove hand brake pad carrier rearwards around rotor and withdraw from suspension crossmember. Remove old pads by loosening nuts on outer face of carrier and lifting out with a suitable hook tool.
Removal (XKE Rear) – Remove rear seat cushion on both caliper inspection covers for access to rear calipers. Remove clips retaining pins, and withdraw pads. Installation – Draw out half the reservoir fluid if pistons are to be pushed back within cylinders. Install new pads, pins, and clips.
Where is the wind carrier on a Jaguar XKE?
Wind carrier along adjuster bolt to give dimension of 750″ (19.05 mm) between pad faces. Place pad carriers in position on caliper. Install retraction plate with tips in pad carrier. Secure pad carrier with bolts and tab washers.
