How do I get rid of FG Falcon center console?

How do I get rid of FG Falcon center console?

Donating Members

1. Remove tissue box holder.
2. Undo the 2 bolts shown.
3. Remove the forward panels on each side of the console.
4. Undo bolt shown on both sides.
5. Remove cup holder/top cover by prising it up from the rear and poping each glip out gently.
6. Remove handbrake boot.
7. Undo the three bolts around the auto surround.

How do you remove the center console in a Ford?

The front part of the console sort of hooks under the dashboard bezel either side of the ashtray, I find it easier to remove the ashtray/stereo surround – open the ashtray and look for 2 screws either side and undo them, pull the ashtray away and it will unhook from the top.

How do you remove the centre console on a Ford XR6 Turbo?

Then it’s onto the front half of the console. There are four silver coloured screws to remove (two of them are in the photo). There’s the Philips head screw to the right of one of the silver screws – remove that. Then remove the two Philips head screws on each side – they hold the plastic sides in place.

Where are the screws on the centre console?

The screw facing us holds the centre console in place – remove the screw on each side. Pay attention to which screws go where – the upper pair and lower pair are different from each other. Now I’m getting somewhere.

Where is the fork on the centre console?

When putting the silver plastic surround back on, make sure that you put the white plastic fork on the left over the small black lever on the right. This is the bit that shows whether you’re in P R N or D when you slide the lever back and forth – rather important.

The front part of the console sort of hooks under the dashboard bezel either side of the ashtray, I find it easier to remove the ashtray/stereo surround – open the ashtray and look for 2 screws either side and undo them, pull the ashtray away and it will unhook from the top.

Then it’s onto the front half of the console. There are four silver coloured screws to remove (two of them are in the photo). There’s the Philips head screw to the right of one of the silver screws – remove that. Then remove the two Philips head screws on each side – they hold the plastic sides in place.

When putting the silver plastic surround back on, make sure that you put the white plastic fork on the left over the small black lever on the right. This is the bit that shows whether you’re in P R N or D when you slide the lever back and forth – rather important.

The screw facing us holds the centre console in place – remove the screw on each side. Pay attention to which screws go where – the upper pair and lower pair are different from each other. Now I’m getting somewhere.