What was the transmission on the Oldsmobile 442?

What was the transmission on the Oldsmobile 442?

Beginning in 1965, the 4-4-2s standard transmission was a 3 speed manual along with optional 2 speed automatic and 4 speed manual, but were still badged as “4-4-2″s. By 1968 badging was shortened to simply “442”, but Oldsmobile brochures and internal documents continued to use the “4-4-2” model designation.

When did the Oldsmobile Cutlass 442 come out?

Main article: Oldsmobile Cutlass The Oldsmobile 4-4-2 (also known as the 442) is a muscle car produced by Oldsmobile between the 1964 and 1987 model years.

What was the quarter mile acceleration of a 1965 Oldsmobile 442?

Modern Rod tested a 1965 F85 4-4-2 with the four-speed manual, slicks, and headers and obtained a quarter mile acceleration of 13.78 seconds at 102.73 mph (165 km/h); Car Life ‘ s automatic ’65 ran the quarter mile in 15.5 seconds at 89 mph (143 km/h), with a 0 to 60 time of 7.8 seconds.

What was the W30 engine on the Oldsmobile 442?

The W30 engine added an outside-air induction system (admitting cool air to the carburetors via tubing from the front grill) and a hotter cam, rated – or, more likely, underrated – the same as the L69. The battery was relocated to the trunk to make room for the air hoses, which prevented the package from being ordered on convertible models.

What kind of car was the Oldsmobile 442?

Seeing is believing… owning is unreal.” 1968 Hurst/Olds pamphlet The 442 was officially made its own model in 1968. The special limited edition Hurst/Olds was introduced and produced nearly 400 horsepower. Completely redesigned from the previous year, the 442 sported the then-popular fastback design for the first time ever.

When did the Oldsmobile 4-4-2 come out?

The Oldsmobile 4-4-2 (also known as the 442) is a muscle car produced by Oldsmobile between the 1964 and 1987 model years. Introduced as an option package for US-sold F-85 and Cutlass models, it became a model in its own right from 1968 to 1971, spawned the Hurst/Olds in 1968, then reverted to an option through the mid-1970s.

What kind of transmission does an Oldsmobile 4-4-2 have?

Beginning in 1965, the 4-4-2s standard transmission was a 3 speed manual along with optional 2 speed automatic and 4 speed manual, but were still badged as “4-4-2″s.

When did the Oldsmobile Cutlass become an option?

Introduced as an option package for US-sold F-85 and Cutlass models, it became a model in its own right from 1968 to 1971, spawned the Hurst/Olds in 1968, then reverted to an option through the mid-1970s.

What can I use to tighten a loose gear shift?

Remove the bolts and nuts that secure the center console around the gear shifter with a 1/4-inch drive ratchet, a metric socket and a Phillips head screwdriver. This will expose the rubber boot. Pull back any carpet as needed to make room for the rubber boot to be pulled over the gear shifter.

What kind of wheels did a 1965 Oldsmobile 442 have?

1965 Oldsmobile 442 convertible Other touches added to the ’65 were chrome body side scoops adorned with 4-4-2 badging, chambered dual exhaust pipes, chrome single snout air cleaner, and 4-4-2 badging on the dash. Late in the year option N98 was added, which were chrome 14 in × 6 in (356 mm × 152 mm) wheels.

What kind of transmission does an Oldsmobile W30 have?

Only 54 W30s were built by the factory, although an additional 97 were produced for dealer installation. The standard transmission was a three-speed manual with column shift and the two-speed Jetaway automatic with switch-pitch torque converter was optional.

When did the Oldsmobile muscle car era end?

As the muscle car era drew its end in the seventies, Oldsmobile marked their 1millionth unit made in 1977. Today, new Oldsmobile models incorporate technology and style. Models such as the Bravada, Aurora, Alero, Silhouette, Delmont, Lss, and Omega brought forth innovations to the industry.

Where is the reverse shift lever located on a GMC?

Cases, extension housings and side covers may be cast iron or aluminum and in any combination thereof. Casting number T10-XX or 13-04 are on passenger side of case. They all have 9-bolt side covers and 36 tooth synchro rings. Reverse shift lever is located in the extension housing, along with main shaft reverse which is a straight cut gear.

How many gears does a 1966 GMC manual have?

Fully synchronized with 30 tooth synchro rings. 1966-69 units may have electric overdrive. It has a four step cluster and all the gears are helical cut. Cast iron case and extension housing with 9-bolt side cover. Fully synchronized with 27 tooth 1st gear and 36 tooth 2nd & 3rd gear synchro rings.

Where are reverse gears located in a Jeep Cherokee?

Reverse gears are helical cut and are located in the extension housing. Cast iron case, extension housing and side cover. The side cover has 7 bolts and 3 shifter cams. The synchro rings have 30 teeth and the unit has a 5-step cluster gear. Reverse gears are straight cut and are located in the main transmission case.