How do I reset my Ram 1500 code?

How do I reset my Ram 1500 code?

How To Reset the Check Engine Light on a RAM 1500

1. Find your battery under the hood and disconnect the black/negative cable.
2. Wait 20 minutes for the power reserve to expire. The RAM 1500 check engine light should reset automatically during this time.
3. Now, just reconnect the black/negative cable.

How to read an error code on a Dodge Ram?

In order to read the error code, the following procedure must be performed: Turn the ignition off. After 5 seconds, turn on the ignition, immediately turn it off, turn it on again, turn it off and on again. (Remember that ignition does not mean starting the engine). What types of scanners does the dealer use to work with the Dodge Ram?

Why does my Dodge Ram engine not start?

Dodge Ram: Engine Cranks → Won’t Start There are a lot of issues that can cause your Ram to crank, but not start. The engine needs air, fuel, and a spark in order to run. It is highly likely that if the engine is cranking, but not starting that it has thrown an OBDII code.

Why is my Dodge ram1500 no power in cab?

It’s very likely a problem with the power control module or the integrated power module. Using a scan tool check to see if there are any trouble codes being stored in the memory of the PCM. Then if there is no trouble codes try doing a complete system reset in case we have a software glitch.

How to fix intermittent start problem with Ram 1500?

DON’T DO THIS WITH ONE CONNECTED TO THE BATTERY, COMPLETELY UNHOOK YOUR BATTERY FROM BOTH CABLES before touching them together. did the trick. lock/unlock worked, and it started right up. some crazy kind of hard reboot of the computer that my buddy found online while we were troubleshooting… 31 people found this helpful.

What should I do if my Ram 1500 cranks but does not start?

If the engine cranks but does not start, or starts and stalls, the fuses should be inspected, especially the power door locks fuse. The power door lock fuse provides power to a module that sends the Powertrain Control Module (PCM) the “OK to start” signal. The average cost for a Dodge Ram 1500 General Diagnosis is between $88 -$111.

Why does my Ram not start when I turn it on?

If the plugs are firing at the wrong time, or something has happened to cause the camshaft to no longer be in sync with the crankshaft, your Ram won’t start. There will usually be OBDII codes associated with timing related problems, but not always.

Is there a problem with my Ram 1500?

Multiple coolant leaks are one of the more common 2015 RAM 1500 problems, as well as affecting model years 2009-2014. Many owners report that the leaking is strange because it’s difficult to locate even with a pressure test and that the leak only occurs when the engine is cold.

How to know if your Dodge Ram has transmission issues?

There are a variety of ways transmission issues show up in these trucks, including: 1 Slow starts. 2 Engine running rough. 3 Bumping hard into 1st gear. 4 Jerk when shifting from 1st to 2nd. 5 Slipping into gear when in traffic. 6 Hard downshift to stop when slowing down.