Most popular

What type of transmission fluid does a 96 Chevy Blazer take?

What type of transmission fluid does a 96 Chevy Blazer take?

Dexron™ VI Automatic Transmission
Chevy Blazer Automatic Transmission 1996, Professional™ Full Synthetic Dexron™ VI Automatic Transmission Fluid by ACDelco®.

How often should I Check my GMC Jimmy transmission fluid?

The transmission fluid in your GMC Jimmy is crucial to the life of your vehicle. The transmission fluid acts as a lubricant to the gears and components within the transmission. The transmission fluid should be checked anytime the engine oil is changed, or every 50,000 miles.

What kind of transmission does a 1997 GMC Jimmy have?

Mine is a 1997 Jimmy 4×4. When it is cold outside, the transmission shift hard from 1-2 and takes quite awhile (as well as a low speed) to shift from 2-3-4. The RPM needle shakes violently back and forth thus preventing the vehicle to obtain speed. The vehicle WILL shift eventually, but this make going up a slight hill very slow and time consuming.

How much fluid does a GM 4L60E need?

The 4L60E transmission weighs 146 pounds dry, and 162 wet. It requires 8.4 quarts (9.64″ torque converter) or 11.4 quarts (11.81″ torque converter) of transmission fluid, Below is a list of common transmission problems with the GM 4L60E Transmission and possible solutions to repair.

Why is my GMC Jimmy transmission so slow?

When it is cold outside, the transmission shift hard from 1-2 and takes quite awhile (as well as a low speed) to shift from 2-3-4. The RPM needle shakes violently back and forth thus preventing the vehicle to obtain speed. The vehicle WILL shift eventually, but this make going up a slight hill very slow and time consuming.

The transmission fluid in your GMC Jimmy is crucial to the life of your vehicle. The transmission fluid acts as a lubricant to the gears and components within the transmission. The transmission fluid should be checked anytime the engine oil is changed, or every 50,000 miles.

The 4L60E transmission weighs 146 pounds dry, and 162 wet. It requires 8.4 quarts (9.64″ torque converter) or 11.4 quarts (11.81″ torque converter) of transmission fluid, Below is a list of common transmission problems with the GM 4L60E Transmission and possible solutions to repair.

Why is there no fluid in my transmission?

Transmission fluid is disappearing, no leaks evident. Not ever changing the fluid is usually what causes the transmission to fail; not changing it after the fact. If you’re losing fluid then it’s due to an external transmission leak, a faulty vacuum modulator, or a leaking transmission cooler.

Where is the transmission dipstick on a GMC Jimmy?

Locate the transmission dipstick, which is under the TRANS/LOCK handle near the center of the engine compartment. Flip the handle up and pull the dipstick out. Wipe the tip off with a clean rag. Replace the dipstick and push it all the way back into the reservoir. Wait three seconds and remove the dipstick.

Author Image
Ruth Doyle