When did the second generation Concorde come out?

The Concorde was completely redesigned for the 1998 model year. The “Second Generation” design was introduced in 1996 as the Chrysler LHX concept car.

What kind of engine did the Chrysler Concorde have?

Design background. Until that time, the only engine confirmed for use was Chrysler’s 3.3 L pushrod V6. The 3.3 L engine’s 60° block was bored out to 3.5 L, while the pushrod-actuated valves were replaced with SOHC cylinder heads with four valves per cylinder, creating an advanced 3.5 L V6.

Why was the Chrysler Concorde discontinued after 1992?

This sleek styling gives the Concorde a low drag coefficient which was ahead of its time. Although American Motors’ Eagle Premier (and Dodge Monaco) was discontinued by Chrysler after the 1992 model year, the new Concorde’s packaging was derived from the Premier, and all the suspension and drivetrain development mules were Premiers.

What was the average speed of the 1993 Concorde?

However, the Overhead Travel Information System (OTIS), or on-board computer with integrated map lights, was retained. A notable achievement included the Center for Auto Safety ranking the 1993 Concorde as superior in crashworthiness after testing it at 35 miles per hour (56.3 km/h) into a wall.

The Concorde was completely redesigned for the 1998 model year. The “Second Generation” design was introduced in 1996 as the Chrysler LHX concept car.

What was the name of the 1990 Chrysler Concorde?

The chassis design was continually refined throughout the following years, as it underpinned more Chrysler prototypes: the 1989 Chrysler Millennium and the 1990 Eagle Optima. By 1990, it was decided that the new technologically advanced car would need a new technologically advanced engine to power it.

What was the horsepower of the Chrysler Concorde?

The 3.3 L engine had 153 hp (114 kW) from 1992 to 1993 and 161 hp (120 kW) in the remaining years of the first generation. Both 3.3 L engines were rated at 18/21/26 MPG.

When did the Concorde first fly at supersonic speeds?

The group met for the first time in February 1954 and delivered their first report in April 1955. At the time it was known that the drag at supersonic speeds was strongly related to the span of the wing.

Why was the Concorde considered to be infeasible?

In an SST design, this would have required enormous engine power to lift off from existing runways, and to provide the fuel needed, “some horribly large aeroplanes” resulted. Based on this, the group considered the concept of an SST infeasible, and instead suggested continued low-level studies into supersonic aerodynamics.

When did the first Concorde advertisement come out?

An advertisement covering two full pages, promoting Concorde, ran in the 29 May 1967 issue of Aviation Week & Space Technology. The advertisement predicted a market for 350 aircraft by 1980 and boasted of Concorde’s head start over the United States’ SST project.

What was the pressurisation level of the Concorde?

Airliner cabins were usually maintained at a pressure equivalent to 6,000–8,000 feet (1,800–2,400 m) elevation. Concorde’s pressurisation was set to an altitude at the lower end of this range, 6,000 feet (1,800 m).

When was the last year the Chrysler Concorde was made?

The Concorde, 300M, and Intrepid were discontinued in 2004. The all-new, rear-wheel-drive Chrysler 300 replaced the Concorde (and 300M) in late 2004 as a 2005 model.

What kind of paint did the Chrysler Concorde have?

In keeping with its upscale position, Concorde’s body side moldings incorporated bright chrome (later golden colored) work not found on its Dodge or Eagle siblings. On Concordes with gray lower body paint color, the gray came all the way up to the chrome beltline; on Visions the gray lower body paint area was smaller and much more subtle.

The 3.3 L engine had 153 hp (114 kW) from 1992 to 1993 and 161 hp (120 kW) in the remaining years of the first generation. Both 3.3 L engines were rated at 18/21/26 MPG.

Is the Chrysler Concorde related to the Dodge Intrepid?

The Concorde was related to the Chrysler/Dodge Intrepid, Eagle Vision, Chrysler 300M, Chrysler LHS, and the eleventh and final generation Chrysler New Yorker. It was on Car and Driver magazine’s Ten Best list for 1993 and 1994.

What’s the difference between the Chrysler Vision and Concorde?

The Concorde was given a more traditional image than the Vision. The two shared nearly all sheetmetal in common with the main differences limited to their grilles, rear fascias, body side moldings, and wheel choices. The Concorde featured a modern take on Chrysler’s signature waterfall grille.

What kind of engine does the Chrysler Concorde have?

All Concordes gain the trademark chrome-edged grille design, quad projector headlights, fog lamps and other elegant design elements of the departed LHS. Powertrain choices have been revised for 2002. Topping the line, the new Limited is powered by a 250-horsepower, 3.5-liter V-6 engine.

What is the cargo volume of a 2002 Chrysler Concorde?

The trunks cargo volume is 18.7 cubic feet. The new Limited uses a 250-hp, 3.5-liter V-6, the LXi gets a 234-hp version of that engine and the LX carries a 200-hp, 2.7-liter V-6. All engines work with a four-speed-automatic transmission. Side-impact airbags for the front seats on all models are optional.

Is the Dodge Concorde the same as the Dodge Intrepid?

A corporate near-twin to the Dodge Intrepid, the Concorde is also a cousin to the Chrysler 300M, which uses the same basic front-drive platform but has different styling and smaller dimensions.

How big is the wheelbase on a Dodge Concorde?

The Chrysler division of DaimlerChrysler offers near-luxury and upscale family models, while Dodge caters to buyers who are looking for family-oriented value and slightly sportier attributes. Each Concorde sedan rides a 113-inch wheelbase and measures 207.7 inches long overall a fraction longer than the Cadillac DeVille and Buick Park Avenue.

What kind of transmission does a Chrysler Concorde have?

The chassis itself became a flexible architecture capable of supporting front or rear-wheel drive (designated “LH” and “LX” respectively). The transmission was inspired by the Premier’s Audi and ZF automatics. Borrowing heavily from Chrysler’s A604 (41TE) ” Ultradrive ” transversely mounted automatic, it became the A606 (also known as 42LE).

When did Chrysler start designing the Concorde car?

Design of the chassis began in the late 1980s, after Chrysler had bought another automaker, American Motors Corporation (AMC) in 1987. During this time, Chrysler began designing the replacement for the Dodge Dynasty and Chrysler New Yorker, as well as a potential Plymouth.

Which is the newest version of the Chrysler Concorde?

A Limited model is the newest version of the Concorde, and it replaces the luxury LHS sedan, which was a separate model and was discontinued after the 2001 model year. The Concorde LX and LXi sedans are also available.

Which is bigger the Chrysler Concorde or the Intrepid?

The Concorde has a larger trunk opening than the Intrepid, but the Chrysler sedan lacks a folding rear seatback. The trunks cargo volume is 18.7 cubic feet. The new Limited uses a 250-hp, 3.5-liter V-6, the LXi gets a 234-hp version of that engine and the LX carries a 200-hp, 2.7-liter V-6.

Ever since the second-generation Concorde debuted for 1998, its been known for eye-catching styling and is practically a show car in street form. But beyond its striking appearance lies a roomy and functional sedan that rides pleasantly, is easy and enjoyable to drive, and feels more nimble than a lot of big cars.

When did the second generation Concorde come out?