Most popular

What causes a PT Cruiser head gasket to fail?

What causes a PT Cruiser head gasket to fail?

While there are many reasons that your PT Cruiser’s head gasket can fail, the most common ones have to do with the cooling system causing the engine to overheat. Low Engine Coolant – If there is not enough coolant to properly cool the engine, it’ll overheat and blow the head gasket.

Where can I get a compression test on my PT Cruiser?

Google-compression test, easy. Autozone will loan the tester.) both require you to get in there. You can pick up a used head at any salvage place (or have yours cleanedup) and order the head gasket on ebay (might as well do the valve cover/sparkplug tubes also). Good luck. 87 people found this helpful.

What should I do about my PT Cruiser overheating?

Checked debris between condensor and fan, fan works, coolant full, thermostat works, all relays good, changed egr valve and thoroughly cleaned egr tubing, no cracked head or head gasket problem. Getting to my wits end and ready to take long drive off short pier. Any ideas what’s wrong or what else I could do to fix this problem?

Is there a problem with the PT Cruiser radiator?

112 people found this helpful. Our 2006 was doing this, found that there is a problem with PT radiator fans, they have two speeds and the low speed often burns out, you can crawl under there disconnect the power and add power and ground to 2 pins then try the other pin, mine wouldnt work on one speed but would did on high. Google this.

How much does it cost to replace head gasket on Chrysler PT Cruiser?

The average cost for a Chrysler PT Cruiser head gasket replacement is between $1,169 and $1,340. Labor costs are estimated between $657 and $828 while parts are priced at $512.

How much does it cost to replace a water pump on a PT Cruiser?

The average cost for a Chrysler PT Cruiser water pump replacement is between $760 and $921. Labor costs are estimated between $616 and $777 while parts are priced at $144. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

Can a water pump replace a blown head gasket?

Then again, a water pump replacement might fix the problem, but only temporarily. Sooner or later, the head gasket could collapse — its weakness having been initiated during the overheat. Simply put, overheating can often be the gift that keeps on giving.

Where can I get a water pump for my Ford Taurus?

AutoZone sells water pumps that are designed to fit your make and model, and we make finding the right parts easy. Whether you need a water pump for a Ford Taurus, or any other vehicle, just enter your vehicle’s year, make, model, and engine up above, and we’ll find the part you’re looking for.

What to do if your PT Cruiser overheats?

1. Work on cool engine 2. Drain overflow tank. Pull off hose at tank site. Use a throwaway cup to catch antifreeze. 3. Put overflow tank hose back after draining to add mark. 4. Open bleeder valve 10 mm and remove overflow hose at radiator end. 5.

What causes a blown head gasket on a Chevy Cruze?

Low Engine Coolant – If there is not enough coolant to properly cool the engine, it’ll overheat and blow the head gasket. Low engine coolant can be both the cause and a symptom of a blown head gasket.

What happens if you blow your head gasket?

Loss of Power – A blown head gasket can leave your PT Cruiser feeling sluggish at speed. “Milky” Oil – Depending on how bad and where the head gasket has broken, engine coolant can mix with the oil.

What causes a blown head gasket on a Chrysler PT Cruiser?

One of the most common critical engine problems is the blown head gasket. If your Chrysler PT Cruiser has blown its head gasket, you may find it running poorly or not at all. Below you’ll find the symptoms, causes, and price of a Chrysler PT Cruiser head gasket.

Why does the Chrysler PT Cruiser look so good?

Since it’s such a well-known vehicle you want to know that it looks as good as it possibly can because you know that eyes will be on it so we have a range of visual upgrades to help you. They can make your PT Cruiser stand out in just the right way so that you’ll enjoy driving it even more.

Why do you need a PT Cruiser body kit?

Since everybody sees the exterior of your vehicle first it’s important to make sure that it looks exactly right which is why Chrysler PT Cruiser body kits are perfect.

Why does my 2006 PT Cruiser overheat?

2006 pt cruiser 2.4 turbo ho put on fail proof thermostat a month or two . Don’t not overheat on 20 mile drive but does on a longer trip. Radiator is full just notice coolant tank may be leaking could that be the only problem or something else? Cooling fan is working also. Is this a good question?

How much does a head gasket cost on a car?

With parts and labor, the average head gasket price is north of $1200. They can be significantly more depending on the model year and engine. If you plan on tackling the job yourself, start at the beginning of the weekend, and make sure that you use a torque wrench when putting everything together.

While there are many reasons that your PT Cruiser’s head gasket can fail, the most common ones have to do with the cooling system causing the engine to overheat. Low Engine Coolant – If there is not enough coolant to properly cool the engine, it’ll overheat and blow the head gasket.

Low Engine Coolant – If there is not enough coolant to properly cool the engine, it’ll overheat and blow the head gasket. Low engine coolant can be both the cause and a symptom of a blown head gasket.

Loss of Power – A blown head gasket can leave your PT Cruiser feeling sluggish at speed. “Milky” Oil – Depending on how bad and where the head gasket has broken, engine coolant can mix with the oil.

With parts and labor, the average head gasket price is north of $1200. They can be significantly more depending on the model year and engine. If you plan on tackling the job yourself, start at the beginning of the weekend, and make sure that you use a torque wrench when putting everything together.

Checked debris between condensor and fan, fan works, coolant full, thermostat works, all relays good, changed egr valve and thoroughly cleaned egr tubing, no cracked head or head gasket problem. Getting to my wits end and ready to take long drive off short pier. Any ideas what’s wrong or what else I could do to fix this problem?

112 people found this helpful. Our 2006 was doing this, found that there is a problem with PT radiator fans, they have two speeds and the low speed often burns out, you can crawl under there disconnect the power and add power and ground to 2 pins then try the other pin, mine wouldnt work on one speed but would did on high. Google this.

2006 pt cruiser 2.4 turbo ho put on fail proof thermostat a month or two . Don’t not overheat on 20 mile drive but does on a longer trip. Radiator is full just notice coolant tank may be leaking could that be the only problem or something else? Cooling fan is working also. Is this a good question?

What causes coolant to come out of a blown head gasket?

Because the cylinder head gasket seals coolant passages, a blown head gasket will allow coolant to enter the cylinders. Coolant in the cylinders will cause: Since the cylinder head gasket also seals in the coolant and oil, you may see streaks of oil and coolant streaming down from the gasket.

How to check coolant loss with no visible leak?

Coolant loss with no visible leak? The first thing to check! If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.

How can I tell if my Honda Civic has a coolant loss?

When I have a small coolant leak or coolant loss on a car like this Honda Civic, the first things I always check is.. look for obvious leaks on hoses and the radiator tanks, then I inspect the radiator cap. I am looking for rotted, cracked, dry seals or a weak spring on the radiator cap.

What causes coolant to leak from the reservoir?

1 The Faulty Reservoir Cap There may be times that the reservoir radiator cap may turn out to be faulty. 2 Bad Head Gasket A head gasket is a component that is sandwiched between the engine block and the cylindrical head within the combustion engine. 3 Invisible Leakage Points

What does it mean if your car is losing coolant but no leak?

However, you may breathe easy if the mechanic does not find any trace of exhaust gases in the coolant. It means that the liquid has not reached the engine yet. The radiator cap can deteriorate over time, letting antifreeze slip through when you are driving. A clogged radiator system could be a problem too as it blocks the flow of the liquid.

Can a head gasket leak cause coolant to evaporate?

Solving the mystery of Coolant Disappearing From Reservoir. Sometimes, though the head gasket can turn out to be defective. Such an issue, in turn, can lead to coolant flowing into the cylinder and evaporating. In case, the head gasket leak is a minor one; the air is likely to enter the coolant system.

1 The Faulty Reservoir Cap There may be times that the reservoir radiator cap may turn out to be faulty. 2 Bad Head Gasket A head gasket is a component that is sandwiched between the engine block and the cylindrical head within the combustion engine. 3 Invisible Leakage Points

Can a worn out radiator cap cause antifreeze to leak?

A Worn Out Radiator Cap. The radiator cap can deteriorate over time, letting antifreeze slip through when you are driving. A clogged radiator system could be a problem too as it blocks the flow of the liquid. Check the radiator when the coolant disappears without any trace.

What makes a PT Cruiser run too lean?

Of all the sensors equipped in your vehicle, the O2 sensors may have it the hardest. They deal with super hot exhaust that can cover them in deposits that can leave them ineffective. The heat of the exhaust can also bake the wiring going to/from them over time. If an oxygen sensor goes bad, it can make your PT Cruiser run too lean (or rich).

Why does my PT Cruiser shake at idle?

These packs are fired by the engines computer at exactly the right time to provide the optimal ignition timing. If a coil pack goes bad, it’ll cause a misfire and rough idle condition. Really, your PT Cruiser will be running rougher at any RPM, but a misfire will be most pronounced at idle.

What causes a PT Cruiser fuel injector to go bad?

If a fuel injector is not operating properly, it will either let too much or too little fuel into the combustion chamber relative to the amount of air. There are many reasons why a fuel injector may go bad, as well as different symptoms relative to how they went bad. For more, check out Chrysler PT Cruiser bad fuel injector symptoms.

When did the PT Cruiser start having problems?

Problems occurred for 2001 through its final 2009 model year, and around 89,000 miles. Some PT Cruiser owners started having problems with their beloved cars not cranking or turning over. The wireless control module (WCM) is the primary culprit.

What’s the problem with my Chilton PT Cruiser?

Middle dash bezel (panel) peeling was a problem on some 2001 models; a service bulletin exists and a dealer might replace it for free (they do not have to). Replacement looks easy in the Chilton’s manual: remove the climate control knobs, pull off the bezel (“middle section”).

How many miles does a 2001 PT Cruiser have?

Shopped around for another vehicle, and found a 2001 PT Cruiser Limited, with over 100,000 miles on it, that had been “babied”. Currently driving it, and love the fact that it is a heavy vehicle, despite its small size, and very comfortable.

What are the symptoms of a bad motor mount?

As engines generate a considerable amount of vibration in their regular operation, when there is a problem with the motor mounts, it can usually be quite noticeable. Usually problematic motor mounts will produce a few symptoms that can alert the driver of a potential issue that should be serviced. 1. Impact noises coming from the engine bay

Author Image
Ruth Doyle