What is thinnet coaxial cable?
What is thinnet coaxial cable?
Thinnet is the thin coaxial cabling used for 10Base2 installations of Ethernet networking. Thinnet cabling is RG-58 coaxial cabling that is 3/16 inch in diameter and has an impedance of 50 ohms. Thinnet uses BNC connectors to connect cable segments, computers, and concentrators (hubs).
What is thinnet and Thicknet coaxial cable?
Thicknet and Thinnet (sometimes called ThickWire and ThinWire) are commonly used terms for the larger and smaller size of coaxial cable used in Ethernet local area networks. Thicknet, also known as Thickwire, is 0.4 inches in diameter and has 50 ohms of electromagnetic impedance.
Is RG8X better than RG-58?
RG8. RG8 is a thicker 50 ohm cable, at 12 AWG, that can provide a stronger signal than RG58. It is mainly used for amateur radio. There is also a version called RG8X, which is thinner at 16 AWG but provides similar signal quality.
What is the standard given for thinnet coaxial cable?
It is standardized as IEEE 802.3. The older versions of Ethernet are known as Thick (standard) and ThinNet Ethernet, standards that support speeds up to 10-Mbps. Uses “Thin“ coax cable (RG58A/U or RG58C/U). The maximum length of one segment is 185 metres.
What is the difference between thinnet and Thicknet cable?
Ethernet based LANs using thick cable for inter-connection is referred as Thicknet. While ethernet systems using thinner coaxial cable is referred as Thinnet. Thicknet is also referred as 10Base5 systems, where 10 means 10Mbps speed. RG-58/U is used as thin cable in thinnet based LAN network.
What is the difference between ThinNet and Thicknet cable?
What is the distance limitation of ThinNet?
A much thinner and more flexible type of coaxial cable, ThinNet is used on Ethernet 10Base2 networks and can span distances of up to 185 meters.
What is the difference between RG-58 and RG6?
RE: RG6 versus RG58 This shows that RG6 is good for 2x the distance of RG58. As for the maximum distance that any coax is good for, it depends upon how much loss you can tolerate and how much noise pickup will happen.
What is the difference between RG-58 and rg59 cable?
Q: What is the difference between RG-58 and RG-59 coaxial cable? A: RG-58 is 50-ohm coaxial cable and is typically used for radio communications and thin Ethernet networks. RG-59 is 75-ohm coaxial cable for CCTV and cable TV. Some also use RG-6 for video connections.
What is the difference between RG58 and rg58a U?
RG-58/U and RG-58A/U are the same cable, the only difference is in the centre conductor. RG-58/U has a solid core and RG-58 A/U has a stranded core.
What kind of coaxial cable does thinnet use?
Thinnet, on the other hand, uses a thinner type of coaxial cable known as Radio Grade 58, which is similar to the Radio Grade 6 cable used for cable TV. Thicknet cable is expensive and difficult to work with.
What was thinnet used for in the 1980s?
Thinnet was often used in the 1980s for workgroup or departmental local area networks (LANs); it has largely been replaced by unshielded twisted-pair (UTP) cabling. Thinnet cables must be terminated at both ends.
What kind of coaxial cable is used for 10BASE2 Ethernet?
Thinnet is the thin coaxial cabling used for 10Base2 installations of Ethernet networking. Thinnet cabling is RG-58 coaxial cabling that is 3/16 inch in diameter and has an impedance of 50 ohms. Thinnet uses BNC connectors to connect cable segments, computers, and concentrators (hubs).
What’s the difference between Thick Ethernet and thinnet?
Thicknet, also known as Thick Ethernet or 10Base5, and Thinnet, also known as Thin Ethernet or 10Base2, are obsolete Ethernet networking technologies.
