How do you loosen a flute joint?
How do you loosen a flute joint?
As Victor has said, wiggling from side to side is your best option. Try to grip bare tube as far as possible; putting pressure through the keywork can bend the rods and push pads out of alignment. A (gentle) tap against a hard object can sometimes help to unstick the joint, but don’t overdo it.
Can you use Vaseline on your flute?
You should never use cork grease or vaseline on the joints of the flute. The keys themselves should only be oiled by a professional instrument repairer. The two joins on the flute (between the headjoint, the body and the footjoint) don’t need lubricating per se, but sometimes they can get a bit tight.
Should you lubricate a flute?
Oiling the instrument should be done three to four times during the first month, and once a month after that However, if the bore or the ends of the tenons look dry then don’t hesitate to oil the flute on a more regular basis.
Why are my flute keys sticking?
The dirt usually gets on to the pad when the pad is damp. Dust in the air, or in the flute case, settles on the skin and it gradually becomes slightly sticky. Another cause is players consuming sweet drinks or food before they play the flute. Stickiness seems to follow soon afterwards!
Can I use Vaseline on my flute?
Do flutes need to be oiled?
Oiling the instrument should be done three to four times during the first month, and once a month after that However, if the bore or the ends of the tenons look dry then don’t hesitate to oil the flute on a more regular basis. It is not necessary to oil the inside of the head joint.
Why does my flute sound flat?
You are trying to check your tuning with a cold flute in a cold room. It takes a few moments for a flute to come up to pitch if it is cold. If you are trying to tune a cold flute, it will always sound flat. So, before tuning, close all the keys and breathe slowly through the closed tube to warm it up.
Why does my flute sound airy?
Usually when a flute is airy, it’s because your embouchure is too tight. Experiment by angling your air stream more down instead of straight out. With this type of flute, the air can escape through the keys not in use, creating a less airy tone.
What happens when foot joint on flute is wrong?
Incorrect fitting; when the flute is being assembled the foot joint has to be perfectly parallel to the flute body. When fitted or removed on any angle, the foot joint tenon becomes tapered. The only fix is to take to your local technician who will have the correct tools to fix this. 2.
What causes scoring to appear on a flute?
A very fine piece of grit or dirt trapped in the joint itself. This can grind between the head joint tenon and socket. This may cause scoring to appear on the metal. Take to your local technician, they will be able to remove the head joint without causing any more damage to the flute and re fit the joint.
What’s the best way to play a footjoint flute?
Hold the footjoint with your thumb either on the actual E-flat key or on the body of the footjoint. The palm of your hand will lie over the rod that holds the rest of the footjoint keys. Your fingers will extend over past the rod and keys. Your right palm will obviously be facing down (just like you play the flute).
Why does my flute feel like it is grinding?
More damage can be caused when trying to remove the foot joint forcibly. 2. On some occasions it can feel like something is grinding when removing or fitting the foot joint. This is likely to be dirt/grit in the tenon and may jam the foot joint on.
