Are there any problems with the PT Cruiser?
Are there any problems with the PT Cruiser?
Hi, I bought my 2002 Chrysler PT Cruiser used in Oct of 2006 with about 75,000 miles on it. I had no problems with it up until this past week. My fiance drove it to work and he said it drove fine, on the way home,he said he had the cruise control set at 55 mph, and he said all of a sudden,it started losing speed and downshifting.
When did the Chrysler PT Cruiser come out?
When Chrysler introduced the PT Cruiser, it’s hard to tell if the executives knew how the public would react. This gangster-style design was completely different from anything with wheels back in 2001. And it indeed had a polarizing effect on car buyers. Fans emerged who were fiercely loyal and embraced the car with enthusiasm.
What makes transmission noise in Chrysler PT Cruiser?
Stopping the passage side wheel by hand the noise stopped.I removed the wheel, brakes and rotor it still has the noise. It sounds like it’s coming from the transmission metal to metal at a high point.The transmission works fine. Help Bill
How to disable the PT Cruiser factory antitheft system?
If you lose your key fob, or regularly use valet service, it’s possible to disable the alarm manually. Press the “Unlock” key on your key fob to deactivate the alarm and unlock the car doors. If you’ve lost your key fob, unlocking the driver’s side door with the key automatically deactivates the PT Cruiser’s alarm.
Hi, I bought my 2002 Chrysler PT Cruiser used in Oct of 2006 with about 75,000 miles on it. I had no problems with it up until this past week. My fiance drove it to work and he said it drove fine, on the way home,he said he had the cruise control set at 55 mph, and he said all of a sudden,it started losing speed and downshifting.
Can you still do the LCA bushings on a PT Cruiser?
If you still do the LCA bushings, get a press. They are impossible to get out otherwise, unless you want to burn them out, but beware, the sleeve that goes between the bushing and the control arm is sensitive to heat, and nearly all of the bushing replacement kits require that you reuse that sleeve.
Why is my 2005 PT Cruiser GT stalling?
In Feb 11 the fuel purge sensor had to be replaces 200.00, Mar 11 the clutch and pressure plate 900.00. Now I took it in for a oil change and fuel injector cleaning and approx 50 mi after that the engine light comes on and I take it to get the code read and it tells me its “running lean”now it’s stalling and sputtering .
Do you need both original keys for a PT Cruiser?
You will need both original keys if you or the locksmith programs new keys; the dealer may be able to make new keys from just one but you cannot.
Why does my 2005 PT Cruiser keep bucking?
We have a 2005 PT Cruiser with aprox 116,000 miles on it. Recently it starting having the same issues everyone else is having with it bucking, sputtering at low speed until i can pump the gas enough to get it past the issue and up to a better speed. It does this off and on and the engine light is on when it happens.
What was the problem with my PT Cruiser GT?
MY 2007 PT non-turbo did the same thing at about 18K miles. It was the camshaft positioning sensor. It is a $65 part. I had it replaced under warranty. Knowing what it looks like and how easy it is to replace, I will replace it myself next time. It involved removing two screws and an electrical lead- no biggie.
If you still do the LCA bushings, get a press. They are impossible to get out otherwise, unless you want to burn them out, but beware, the sleeve that goes between the bushing and the control arm is sensitive to heat, and nearly all of the bushing replacement kits require that you reuse that sleeve.
When did I replace the clutch on my PT Cruiser?
I purchased a 03 Pt Cruiser with a manual transmission in July 10, Well in Oct 10 the Timing belt had to be replaced along with the water pump. 700.00. In Feb 11 the fuel purge sensor had to be replaces 200.00, Mar 11 the clutch and pressure plate 900.00.
How many miles does a PT Cruiser have?
It has around 65,000 miles and I changed the trans fluid and filter myself at around 30,000 miles. This car has not been maintenance neglected or abused and the fluid level was within the normal range. Anyway, we dropped it off at the dealer night owl drop late last night.
What kind of engine does PT Cruiser 2.4lt have?
2006 PT cruiser 2.4lt checked , had code for cyl 4 misfire found oil in spark plugs holes had good spark all cylinders replaced plugs wires and valve cover gasket with valve cover off found intake cam lobes on #4 cyl worn down replaced intake cam ran fine for 30 miles ]
What should I do about my PT Cruiser overheating?
Checked debris between condensor and fan, fan works, coolant full, thermostat works, all relays good, changed egr valve and thoroughly cleaned egr tubing, no cracked head or head gasket problem. Getting to my wits end and ready to take long drive off short pier. Any ideas what’s wrong or what else I could do to fix this problem?
What are the problems with a 2007 PT Cruiser?
Unfortunately, engine lights that will not turn off seem to be a prevalent PT Cruiser problem. The common symptoms for the 2007 PT Cruiser are overheating accompanied by the engine light turning on. The code P0340 is often displayed as the problem for owners.
When was the last time a PT Cruiser was made?
1.35 million PT Cruisers were built during its nine-year lifetime. With that many vehicles produced, there are bound to be some PT Cruiser problems. While the last PT Cruiser was produced in 2010, many of them are still on the road.
How much does it cost to fix a PT Cruiser engine?
Typical repair cost for an engine that stalls and shuts off while driving is $700. This is the most dangerous of the PT Cruiser problems. It involves the engine to completely stall out while driving. It can happen sporadically while driving, giving the driver no warning as to when it will happen next.
Why does my PT Cruiser stall while driving?
This is the most dangerous of the PT Cruiser problems. It involves the engine to completely stall out while driving. It can happen sporadically while driving, giving the driver no warning as to when it will happen next. For some drivers, the issue occurs when a certain RPM is achieved. For others, the problem occurs at a certain speed.
It is a small, multipurpose vehicle and was introduced in 2000. One of the most frequently reported problems are the windows, and the wiring and switches that power them. One issue involves the front windows failing to work while the back ones remain fine.
Why does my PT Cruiser windows keep going down?
This can impede the windows as they go down and up. Jake Reed began his freelance writing career in 2002. His work has been published in the “Seoul Times,” “Star News,” the “Diplomacy Journal” and on various websites. Reed holds a bachelor’s degree in political science and philosophy from the University of California at San Diego.
How are the back windows on a Honda Accord controlled?
The back windows can be controlled from the floor console in the back and from the mid-console; the front ones only respond to the middle console. Another problem involves the window switch. The windows have no problem going down but don’t go back up. This is due to the window switch on the dashboard being damaged or broken.
It is a small, multipurpose vehicle and was introduced in 2000. One of the most frequently reported problems are the windows, and the wiring and switches that power them. One issue involves the front windows failing to work while the back ones remain fine.
This can impede the windows as they go down and up. Jake Reed began his freelance writing career in 2002. His work has been published in the “Seoul Times,” “Star News,” the “Diplomacy Journal” and on various websites. Reed holds a bachelor’s degree in political science and philosophy from the University of California at San Diego.
The back windows can be controlled from the floor console in the back and from the mid-console; the front ones only respond to the middle console. Another problem involves the window switch. The windows have no problem going down but don’t go back up. This is due to the window switch on the dashboard being damaged or broken.
How to fix power window on drivers door?
(2) Using an ohmmeter, Test driver door switch for If you do need a new window motor, or regulator, check these instructions out. WINDOW REGULATOR – POWER REMOVAL (1) Remove the watershield. (2) Remove door glass retaining clips and secure the window in the up position using masking tape or equivalent.
Can a power window be repaired on a late model car?
Fortunately, power windows are usually one of the more reliable systems on a late-model car. And diagnosis and repair are usually pretty straightforward. What’s Up? The most common power window mechanism is pretty basic. There’s a simple regulator mechanism, usually similar to the mechanism used on garden-variety hand-cranked windows.
Part car, part truck and entirely different from everything else on the road, the 2001 PT Cruiser went on sale in March 2000 and was an instant hit with buyers. PT stands for personal transportation, and Chrysler describes it as too cool to categorize because it has elements of a sedan, wagon, sport utility vehicle and minivan.
How many seats does a PT Cruiser have?
The Cruiser has a versatile interior with seats for five, including two front buckets and a 65/35-split rear bench that holds three. The rear seatbacks lay flat, and the entire rear seat tilts forward or can be removed for more cargo room.
(2) Using an ohmmeter, Test driver door switch for If you do need a new window motor, or regulator, check these instructions out. WINDOW REGULATOR – POWER REMOVAL (1) Remove the watershield. (2) Remove door glass retaining clips and secure the window in the up position using masking tape or equivalent.
Why does the power window on my car not work?
Remove the screw that hold the motor in place and unclasp the 2 plastic clips that hold the motor in place.
My future son in law also purchased a used PT Cruiser last yr and he is having the SAME problems, the local Chrysler Dealer told him close to $600 to have it repaired. I’m inclined to think that these fan modules aren’t made to last more than about 40,000 miles and then give out.
What’s the normal air pressure on a PT Cruiser?
When it reaches approximately 450 psi, the high side pressure switch cycles the compressor off for safety reasons. The normal operating pressure for the high side is about 150 – 200 psi. Not sure what is causing the pressure to rise so high, but it appears that there may be a blockage in the system restricting the refrigerant flow.
How much does it cost to replace timing belt on PT Cruiser?
Cost $180 to replace. One thing I learned is to call Chrysler (at their 800 number) and complain. When my timing belt broke at 85K miles, they agreed to pay half of the repair (since it didn’t last until 90K which is their recommendation per the owners manual.)
What is the reliability rating of a Chrysler?
The Chrysler Reliability Rating is 3.5 out of 5.0, which ranks it 11th out of 32 for all car brands. This rating is based on an average across 345 unique models.
Stopping the passage side wheel by hand the noise stopped.I removed the wheel, brakes and rotor it still has the noise. It sounds like it’s coming from the transmission metal to metal at a high point.The transmission works fine. Help Bill
Why is my PT Cruiser not shifting gears?
1. the trans has an internal pressure leak on the 2nd gear circuit, 2. there is a problem with the solenoid block or 3. A crappy computer or crappy computer inputs. Anyway, still give it a few miles for the computer to try and smooth it out ..k, then go from there 01 Pt , will not shift out of low gear and speedo doesn’t work.
How many horsepower does a Chrysler PT Cruiser have?
However, the turbocharged PT Cruiser Limited and Dream Cruiser 5 can both generate up to 180 HP, or approximately 30 more than the base model. The base PT Cruiser also comes standard with a 5-speed automatic transmission with 4-speed automatic as an option, while the Limited, Dream Cruiser 5, and Touring editions are available in automatic only.
What are the accessories for a PT Cruiser?
Chrysler PT Cruiser Interior Accessories 1 Dash Kits 2 Floor Mats 3 Seat Covers 4 Steering Wheels 5 Sun Shades 6 Custom Gauges 7 Cargo Liners 8 Seats 9 Dash Covers 10 Shift Knobs
Is there a convertible version of the PT Cruiser?
The PT Cruiser can also be seen as a 2 door convertible. Debuting in 2005, the PT Cruiser convertible exists in base, Touring, and Limited trim levels. Production of the convertible PT Cruiser was halted in 2007, but it still remains a popular version of the model, especially in terms of aftermarket accessories.
What are the exterior colors of a Chrysler PT Cruiser?
Exterior color options were Bright Silver Metallic, Brilliant Black Crystal Pearl Coat, Deep Water Blue Pearl Coat, Inferno Red Crystal Tinted Pearl Coat, Silver Steel Metallic, and Stone White Clear Coat. The only interior color option was Pastel Slate Gray. In 2002 Euro NCAP gave the PT Cruiser a three (out of five) stars rating.
How can I Fix my PT Cruiser wheel?
The only realistic solution is to replace all four wheels with either a non-chrome version of the OEM wheels or another aftermarket wheel. Once one wheel begins to corrode and leak it is only a matter of time until the other begin to also. The car this issue conflicts is the 2006 Chrysler PT Cruiser.
How much does it cost to fix a PT Cruiser engine stall?
The car this issue conflicts is the 2006 Chrysler PT Cruiser. Typical repair cost for an engine that stalls and shuts off while driving is $700. This is the most dangerous of the PT Cruiser problems. It involves the engine to completely stall out while driving.
When is the worst year for PT Cruiser problems?
In general, 2006 is the worst year for PT Cruiser problems. Here the engine light is constantly on and the engine idles rough. The engine light will repeatedly turn on after solutions to fix the problem are attempted.
What’s the best way to fix a PT Cruiser?
The best solution is to have a professional car mechanic well versed in PT Cruiser problems. A tempory solution was to turn the car off and back on. But this only stopped the problem temporarily and quite often the problem would arise again upon the next time the owner drove the car.
What causes a PT Cruiser tire to split?
The metal of the wheels deteriorates causing the chrome coating to peel off. Air from the tire will leak from the valve stem area. This can cause flat tires. It can also cause the tire to split when driving at a high rate of speed on a highway. There is no way to prevent the chrome from peeling.
In 2002 there were also some issues with the engine in the PT Cruiser that related to timing belt problems. It was not an overarching problem that a lot of drivers experienced, but some did have problems with the belt breaking sooner than it should have. There were a number of problems in 2003 with timing belts failing on drivers.
What happens when the timing belt fails on a Chrysler PT Cruiser?
Some engines are called interference engines and the pistons will bend the valves when a timing belt fails. 26 people found this helpful. Yep. tenspeed is right on. The piston will come up on a compression or an exhaust stroke and hit a valve that is not supposed to be open.
What was the year of the PT Cruiser?
2009 was also a relatively problem-free year for the PT Cruiser as far as timing belts go. Well it did have some issues for a few drivers, nothing specific was related to the timing belt so if that’s an area of concern for you, the 2009 PT Cruiser is it one that you need to worry about too much.
Why do PT Cruisers have bent valve stems?
To expand on guyiknow’s answer. PT Cruisers run semi interference engines. The path of the valves will not enter the path of the piston. It is possible for the exhaust valves and intake valves to contact at which point you end up with bent valve stems.
What kind of engine does a PT Cruiser have?
Model year: Trims such as the GT can be equipped with a turbo-boosted 2.4 L Chrysler engine for sale. This was brought in during the 2003 model year. When looking at engine listings, most will indicate which model years the engine is compatible with. Brand type: You can choose between OEM and aftermarket branded engines.
Some engines are called interference engines and the pistons will bend the valves when a timing belt fails. 26 people found this helpful. Yep. tenspeed is right on. The piston will come up on a compression or an exhaust stroke and hit a valve that is not supposed to be open.
To expand on guyiknow’s answer. PT Cruisers run semi interference engines. The path of the valves will not enter the path of the piston. It is possible for the exhaust valves and intake valves to contact at which point you end up with bent valve stems.
1. the trans has an internal pressure leak on the 2nd gear circuit, 2. there is a problem with the solenoid block or 3. A crappy computer or crappy computer inputs. Anyway, still give it a few miles for the computer to try and smooth it out ..k, then go from there 01 Pt , will not shift out of low gear and speedo doesn’t work.
The car this issue conflicts is the 2006 Chrysler PT Cruiser. Typical repair cost for an engine that stalls and shuts off while driving is $700. This is the most dangerous of the PT Cruiser problems. It involves the engine to completely stall out while driving.
What kind of engine does a Chrysler PT Cruiser have?
In addition to this standard model, a 2.2 L four-cylinder diesel engine built by Mercedes Benz was also available in Europe, Asia, and South Africa. A 2.0 L engine ( D4RE) was also available outside the US. It produced 140 hp (104 kW) SAE at 6500 rpm with 130 lb⋅ft (176 N⋅m) of torque at 4800 rpm.