How do you use YPAO?

How do you use YPAO?

Place the YPAO microphone at your listening position and connect it to the YPAO MIC jack on the front panel. To start the YPAO process, use the cursor keys to select “Start” and Press ENTER. Press ENTER. Use the cursor keys to select “SAVE” and press ENTER.

What does ypao stand for?

The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room.

How do I calibrate my microphone?

Ideally the mic should be placed at the same height as your ears when you’re sitting watching a movie. If you have a camera tripod, use it to place the mic at ear height; perfectionists should move the couch entirely out of the way. Lacking a tripod place the mic on the back of the couch, atop the highest pillow.

What is ypao mic?

The YPAO microphone is a device made by Yamaha which is used to calibrate the audio output of your Yamaha home theater AV receiver.

What does ypao volume do?

YPAO Volume is an advanced sound technology that automatically applies loudness equalization (EQ) to the audio that comes through your AV receiver, applying just the right amount to compensate for the volume level. The lower the volume control setting, the more EQ it adds.

What is YPAO MIC in Yamaha?

What is audio calibration?

The most basic part of theater audio calibration is making sure that all of the speakers’ levels are balanced. This is a relatively simple process that you can perform with a sound-pressure-level (SPL) meter and a test tone played through each speaker, one at a time.

What is a calibration microphone used for?

Connect the supplied calibration microphone to the CALIBRATION MIC jack. Set up the calibration microphone. Place the calibration microphone at your listening position and set it at the same height as your ears.

Does ypao set crossover?

YPAO is measuring your speakers in your room and setting the cross-over to what it sees as best. I would leave it as is for a while and listen to it. If it sounds good to you, your done, enjoy.

Where to place the Ypao microphone on the speaker?

If the crossover frequency is adjustable, set it to maximum. Place the YPAO microphone at your listening position and connect it to the YPAO MIC jack on the front panel. Place the YPAO microphone at your listening position (same height as your ears).

How to optimize the speaker settings ( Ypao )?

Disconnect the YPAO microphone from the unit. This completes optimization of the speaker settings. The YPAO microphone is sensitive to heat, so should not be placed anywhere where it could be exposed to direct sunlight or high temperatures (such as on top of AV equipment).

How does Ypao work on a surround sound system?

Using a quad-point measurement technique, this level of YPAO can determine what angle and distance each overhead (or Dolby Atmos ® -enabled) speaker is from the listening position.

How do I calibrate my Ypao remote control?

Press the left or right arrow buttons on the remote control until Multiple appears on the screen, then press enter to start the calibration. The onscreen display will guide you through the rest of the process: YPAO menu. Always make the first measurement from your prime (“number one”) listening position.