How do I Change my parking brake pads?
How do I Change my parking brake pads?
A vehicle equipped with a parking brake mechanism integrated into the rear brake caliper is serviced with the replacement of the rear brake pads. These assemblies are easily identified by a large spring on the back of the caliper with a brake hose and cable attached to the caliper.
How does a drum style parking brake work?
The service of this style of parking brake is similar to the service of a drum style rear brake assembly. A vehicle equipped with a parking brake mechanism integrated into the rear brake caliper is serviced with the replacement of the rear brake pads.
When do parking brake shoes need to be replaced?
Note: If your vehicle has drum style brakes on the rear, the brake shoes are the working component of the assembly and can be engaged hydraulically or mechanically. If you are hearing a grinding noise coming from the rear of your vehicle, your brake shoes are likely worn out and must be replaced along with the brake drums.
Is there a way to rerelease the parking brake?
The best way to do this is to use the diagnostic tool or parking brake tool to do. However, in many cars, it will work to engage the parking brake with the button. You will hear the parking brake motors sound for 2-3 seconds until the parking brake is engaged. When it is engaged, you can rerelease it.
How do you replace parking brake shoes on a car?
Turn the shoes over and insert the lower spring in the same way you removed it using a standard screwdriver. Make sure the adjuster wheel is in the same position as when you took it apart. Now the parking brake shoes are ready for installation, cleaned up and ready to go. Insert the rear shoe into the pivot mount.
The best way to do this is to use the diagnostic tool or parking brake tool to do. However, in many cars, it will work to engage the parking brake with the button. You will hear the parking brake motors sound for 2-3 seconds until the parking brake is engaged. When it is engaged, you can rerelease it.
How do you remove a parking brake spring?
A brake spring removal tool is needed to help remove the brake shoe return springs. You can use a pair of side cutters to grasp the spring and pull it but it is much more difficult that using the correct tool. The tool will have a tang on the round part which catches under the spring and forces it from the backing plate.
Where is the parking brake actuator on a car?
The parking brake actuating lever will still be attached to the rear shoe. While grasping the parking brake cable spring, move it upward on the cable to create room to remove the brake shoe actuator arm from the cable.
