How do you change the shift selector cable?
How do you change the shift selector cable?
The new cable is routed and the bushings are pressed on, or in the case of a mechanically-connected system, a nut and bolt are tightened to connect the cable to the shift lever on the transmission. The car is lowered and the shift cable is tested for proper adjustment and operation.
How to remove shift cable from Jeep Liberty?
Transmission shall not be able to shift from NEUTRAL to REVERSE. (1) Shift transmission into PARK. (2) Raise vehicle. (3) Remove the shift cable eyelet from the transmission manual shift lever (Fig. 159). (4) Remove shift cable from the cable support bracket. (5) Lower vehicle.
What happens if the gear shift cable breaks?
No response to gear shift movement. Should the cable break, or the cable ends detach, you will not be able to shift at all. Sometimes it is a matter of replacing the cable end bushing. Other times, the entire cable assembly must be replaced.
Where is the automatic shifter cable on a Silverado?
If you are having issues shifting in or out of park or L ,your shifter cable may be getting bad.On Silverado-Sierra trucks the automatic shifter cable comes up through the floor and is under the carpet on the drivers side.Because the drivers feet is always on the cable they seem to go bad a lot on Silverado-Sierra trucks.
What is automatic transmission shift?
An automatic transmission, also called auto, self-shifting transmission, n-speed automatic (where n is its number of forward gear ratios), or AT, is a type of motor vehicle transmission that can automatically change gear ratios as the vehicle moves, freeing the driver from having to shift gears manually.
What is a shift cable?
The shift cable is a two piece shift cable. The front half (column end) or rear half (transmission end) of the shift cable can be removed without removing the other end/half of the shift cable.
What is a cable shifter?
The shifter incorporates two cables, one that operates the brake and one that controls the derailleur. The derailleur is the mechanism that moves the chain to a given sprocket. The derailleur cable is also known as a shifter cable. Generally, shifter cables are replaced as part of a yearly tune-up or if the cable is frayed or damaged at any point.
What is gear shift cable?
The shift selector cable connects the gear shifter, located on the steering column or on a floor mounted console, to the automatic transmission. The cable is typically steel and is protected from the elements by a plastic outer sheath. At each end of the shift cable, often rubber or nylon bushings allow for cable movement and vibration.