Most popular

Why does my Chrysler PT Cruiser keep stalling?

Why does my Chrysler PT Cruiser keep stalling?

One of the most common issues your Chrysler PT Cruiser is likely to develop is a stalling problem. The most challenging part of diagnosing a stalling problem is reproducing the conditions that led to the stall in the first place. Stalls can happen at any time, and it can be incredibly jarring when it does happen.

What are the problems with a 2007 PT Cruiser?

Unfortunately, engine lights that will not turn off seem to be a prevalent PT Cruiser problem. The common symptoms for the 2007 PT Cruiser are overheating accompanied by the engine light turning on. The code P0340 is often displayed as the problem for owners.

How much does it cost to fix a PT Cruiser engine?

Typical repair cost for an engine that stalls and shuts off while driving is $700. This is the most dangerous of the PT Cruiser problems. It involves the engine to completely stall out while driving. It can happen sporadically while driving, giving the driver no warning as to when it will happen next.

How is the speed of a PT Cruiser controlled?

It is controlled by the sensor near the thermostat on the passenger side which has a slide mechanism as well as a clip like the radiator fan to secure it. High speed operation can be checked by disconnecting the sensor, while low speed can be checked while engine is idling without disconnecting it.

One of the most common issues your Chrysler PT Cruiser is likely to develop is a stalling problem. The most challenging part of diagnosing a stalling problem is reproducing the conditions that led to the stall in the first place. Stalls can happen at any time, and it can be incredibly jarring when it does happen.

Unfortunately, engine lights that will not turn off seem to be a prevalent PT Cruiser problem. The common symptoms for the 2007 PT Cruiser are overheating accompanied by the engine light turning on. The code P0340 is often displayed as the problem for owners.

Typical repair cost for an engine that stalls and shuts off while driving is $700. This is the most dangerous of the PT Cruiser problems. It involves the engine to completely stall out while driving. It can happen sporadically while driving, giving the driver no warning as to when it will happen next.

How can I Fix my PT Cruiser wheel?

The only realistic solution is to replace all four wheels with either a non-chrome version of the OEM wheels or another aftermarket wheel. Once one wheel begins to corrode and leak it is only a matter of time until the other begin to also. The car this issue conflicts is the 2006 Chrysler PT Cruiser.

When was the last time a PT Cruiser was made?

1.35 million PT Cruisers were built during its nine-year lifetime. With that many vehicles produced, there are bound to be some PT Cruiser problems. While the last PT Cruiser was produced in 2010, many of them are still on the road.

1.35 million PT Cruisers were built during its nine-year lifetime. With that many vehicles produced, there are bound to be some PT Cruiser problems. While the last PT Cruiser was produced in 2010, many of them are still on the road.

When is the worst year for PT Cruiser problems?

In general, 2006 is the worst year for PT Cruiser problems. Here the engine light is constantly on and the engine idles rough. The engine light will repeatedly turn on after solutions to fix the problem are attempted.

What’s the best way to fix a PT Cruiser?

The best solution is to have a professional car mechanic well versed in PT Cruiser problems. A tempory solution was to turn the car off and back on. But this only stopped the problem temporarily and quite often the problem would arise again upon the next time the owner drove the car.

What does the code p0340 mean on a PT Cruiser?

The common symptoms for the 2007 PT Cruiser are overheating accompanied by the engine light turning on. The code P0340 is often displayed as the problem for owners. This code means that the camshaft position sensor circuit sensor A bank 1 is malfunctioning. As we will see below this code makes sense since replacing the camshaft fixes the problem.

In general, 2006 is the worst year for PT Cruiser problems. Here the engine light is constantly on and the engine idles rough. The engine light will repeatedly turn on after solutions to fix the problem are attempted.

The best solution is to have a professional car mechanic well versed in PT Cruiser problems. A tempory solution was to turn the car off and back on. But this only stopped the problem temporarily and quite often the problem would arise again upon the next time the owner drove the car.

Why is my PT Cruiser overheating at 70 mph?

Raven wrote: After a time, the spring in the radiator cap looses strength and no longer maintains the abililty to keep all of the water in the anti-freeze from escaping. The overflow tank doesn’t replenish the loss and eventually it overheats. Badly. Like mine did at 70 mph!

Is the PT Cruiser engine covered under warranty?

This problem may be covered under warranty. Ask your Chrysler dealer. CarComplaints.com Notes: The 2006 is the worst year for PT Cruiser engine complaints. Having an engine light on is annoying, but it’s the complaints about the engine shutting-off while driving that really have us concerned.

Can a PT Cruiser stall at any time?

Stalls can happen at any time, and it can be incredibly jarring when it does happen. Before troubleshooting any automotive issue, including stalling issues with the PT Cruiser, make sure that you check the vehicles trouble codes with an OBD2 scanner.

Why does my Chrysler PT Cruiser shut off while driving?

All dash lights come on, gauges go down to zero and car shuts off, the Chrysler dealer says the ignition is bad and will be replaced at owner’s cost or warranty. Yet, this isn’t the problem with the engine light, it’s a faulty switch called power steering pressure switch, this also needs replaced, warranty doesn’t cover it.

When did Chrysler start the anti theft system?

Chrysler anti-theft systems have gone through a few iterations. Starting in 1989, Chrysler started installing them on the C, G, and J body styles. The engine controllers in that era were referred to as SMEC (single module engine controller).

How can I Reset my Chrysler minivan computer?

by Katebo. You can reset the computer on your Chrysler Town & Country minivan in your garage, saving yourself a trip to the mechanic or dealership. When an indicator is illuminated on the vehicle’s instrument cluster, an error code has been sent to the onboard diagnostics, or OBD, computer from a sensor.

Where to reset the computer on a Chrysler Town and Country?

Make sure you reset the computer only after you have finished repairing or servicing the car or you may risk damaging the computer. Locate the OBD port, which is the same size and shape as the scan tool’s connective end; the port can be found on the underside of the driver’s-side dash next to the steering column.

When does the engine shut off in a PT Cruiser?

When pulling to a complete stop the car wants to turn off. A couple of times the car turned off while I was driving down the road. THE CAR BEGAN JUST DYING…I COULD TURN THE KEY AGAIN AND IT WOULD COME ON….USUALLY THE CAR HAD BEEN RUNNING THAT DAY…WHILE I WAS OUT IT HAPPENED…… THEN IT BEGAN DOING IT WHEN I FIRST WENT OUT IN THE MORNING…

Why was the Chrysler PT Cruiser called a segment Buster?

Chrysler famously dubbed the PT Cruiser a “segment buster,” because it defied easy categorization. PT stood for “personal transportation,” and the car was planned to wear Plymouth badges, as concept cars had teased, until Chrysler ended that brand in 1999.

Is the Chrysler PT Cruiser a light truck?

A high seating position and generous headroom from the 63-inch height were attributes shared with small SUVs, then becoming popular. Like those vehicles, the PT was certified as a light truck to qualify for lower fuel economy requirements.

The only realistic solution is to replace all four wheels with either a non-chrome version of the OEM wheels or another aftermarket wheel. Once one wheel begins to corrode and leak it is only a matter of time until the other begin to also. The car this issue conflicts is the 2006 Chrysler PT Cruiser.

What causes a PT Cruiser tire to split?

The metal of the wheels deteriorates causing the chrome coating to peel off. Air from the tire will leak from the valve stem area. This can cause flat tires. It can also cause the tire to split when driving at a high rate of speed on a highway. There is no way to prevent the chrome from peeling.

The metal of the wheels deteriorates causing the chrome coating to peel off. Air from the tire will leak from the valve stem area. This can cause flat tires. It can also cause the tire to split when driving at a high rate of speed on a highway. There is no way to prevent the chrome from peeling.

Why does my 2006 PT Cruiser overheat?

2006 pt cruiser 2.4 turbo ho put on fail proof thermostat a month or two . Don’t not overheat on 20 mile drive but does on a longer trip. Radiator is full just notice coolant tank may be leaking could that be the only problem or something else? Cooling fan is working also. Is this a good question?

When does the oil pressure warning light come on?

The idle control is through the engine control unit, and the dropping to low revs stalls the car when it’s really cold out. The rest of the time, it just seems to hit on the oil pressure sensor. I noticed the ding and the light come on when I am turning, but of course this is at low revs or at a stoplight. For my car, a 2004 PT with 285]

Why does oil pressure light up when you release handbrake?

Probably a faulty oil pressure sending unit. It is fairly common for these to go bad. Don’t know why it would light up when releasing the handbrake though. Seems odd. Just to confirm the pressure is okay, I’d get a mechanical gauge on it to verify the pressure. Year, engine? Probably a faulty oil pressure sending unit.

What should the oil pressure be on a PT Cruiser?

You don’t want to be driving it that much if your low on oil pressure. If its coming on while driving I would bet that the actual oil pressure is good. I say this because if you have low pressure at higher RPMs you would have consistently low oil pressure at low RPMs.

What causes a PT Cruiser to stall out?

It needs them in the right quantities and intervals, or it won’t run right. Fuel issues are one of the most common reasons that a vehicle would stall out, that includes your Chrysler PT Cruiser. Bad gas- can cause an engine to stall out. Water in the gas tank can also cause gas to not fire properly.

What to do if your PT Cruiser overheats?

1. Work on cool engine 2. Drain overflow tank. Pull off hose at tank site. Use a throwaway cup to catch antifreeze. 3. Put overflow tank hose back after draining to add mark. 4. Open bleeder valve 10 mm and remove overflow hose at radiator end. 5.

The idle control is through the engine control unit, and the dropping to low revs stalls the car when it’s really cold out. The rest of the time, it just seems to hit on the oil pressure sensor. I noticed the ding and the light come on when I am turning, but of course this is at low revs or at a stoplight. For my car, a 2004 PT with 285]

Where is the engine code on a PT Cruiser?

When I restarted the engine, the codes were gone and the engine ran like it suppose to. When the cam sensor came I installed it anyway and now the car drives fine. If you turn the key on and off three time in a row, your engine code will be displayed where the odometer is located. No need to go to a shop! 19 people found this helpful.

What causes engine light to come on on PT Cruiser?

11 people found this helpful. my 2007 pt did same thing, engine light came on , car was jerking and bucking, ( had nothing to do with the a/c or heat) it was the cam positon sensor, on line the part is 35.99 to 55.99 depending on where you buy it, local garage did mine part and labor for 162.00 29 people found this helpful.

What to do if your PT Cruiser dies?

My battery died on my 2005 PT CRUISER and once I charged it I got a code P0340. Purchased OEM parts from Amazon and Chrysler to replace the Cam Sensor and Cam Magnet. Install the cam magnet, put dielectric grease on all the plug in connections, push down all the fuses in the fuse box and put the unit back together.

Why does my PT Cruiser stall while driving?

This is the most dangerous of the PT Cruiser problems. It involves the engine to completely stall out while driving. It can happen sporadically while driving, giving the driver no warning as to when it will happen next. For some drivers, the issue occurs when a certain RPM is achieved. For others, the problem occurs at a certain speed.

Why are there cracks in the dashboard of my PT Cruiser?

It isn’t a result of being out in the sun. The cracks often start within 2-3 years of owning the car. The cracks most commonly originate from a vent and spread throughout the length of the dashboard widening as they grow. The only solution is to replace the entire dashboard.

Why did my 2003 PT Cruiser GT stop running?

Our 2003 PT Cruiser GT just turned over 100,000 km and just before that milestone the engine was running rough and had a harder time starting. I changed the spark plugs and the spark plug wires and now the engine runs like it was new. Passed the emmissions test with flying colours too.

What kind of horsepower does a PT Cruiser have?

For 2003, the turbocharged GT model with 215 horsepower and 245 lb-ft of torque gave the PT Cruiser the guts to back up its hot rod looks. Much of the customizing defied the PT’s low-priced nature.

When did the Chrysler PT Cruiser come out?

The PT Cruiser is a compact MPV that was manufactured by Chrysler between 2001 and 2010. If you need to replace the engine with a new or used PT Cruiser engine, you will find a range of engines for sale on eBay.

How big is the engine on a PT Cruiser?

The PT Cruiser was equipped with engines that ranged in size between 1.6L up to 2.4L. Each of these engines on both the gasoline and diesel side is four-cylinder designs that are paired with four or five-speed transmissions. Content provided for informational purposes only. eBay is not affiliated with or endorsed by Chrysler.

11 people found this helpful. my 2007 pt did same thing, engine light came on , car was jerking and bucking, ( had nothing to do with the a/c or heat) it was the cam positon sensor, on line the part is 35.99 to 55.99 depending on where you buy it, local garage did mine part and labor for 162.00 29 people found this helpful.

What’s the oil level on a Chrysler PT Cruiser?

The oil level in the engine block is a tad above the full line, so there’s plenty of oil in the engine, but is was also doing this when the oil level was a little above the ’empty’ line on the dipstick.

My battery died on my 2005 PT CRUISER and once I charged it I got a code P0340. Purchased OEM parts from Amazon and Chrysler to replace the Cam Sensor and Cam Magnet. Install the cam magnet, put dielectric grease on all the plug in connections, push down all the fuses in the fuse box and put the unit back together.

When I restarted the engine, the codes were gone and the engine ran like it suppose to. When the cam sensor came I installed it anyway and now the car drives fine. If you turn the key on and off three time in a row, your engine code will be displayed where the odometer is located. No need to go to a shop! 19 people found this helpful.

Is the Chrysler PT Cruiser a good car?

Will recommend Shelleys and will continue to purchase from them. Btw, this was the second vehicle we’ve purchased from Shelleys. Had a great experience! I love my little car! my experience was very good. He made my wife and I welcome and let us take the car on a drive by our self. Read 21 more dealer reviews… Pretty good people.

Author Image
Ruth Doyle