How much weight can step deck ramps hold?
How much weight can step deck ramps hold?
The step deck trailer ramp is the most versatile ramp system for loading tractors, loaders, trucks, and heavy equipment onto step deck trailers, loading docks, or flatbed trailers. These high-strength, lightweight aluminum ramps are easy to set up, and have a 23,500 lb. per axle weight capacity.
How long are step deck ramps?
8ft x 18 in ramps.
Do step decks have ramps?
Light-duty vehicles can often be loaded onto a step-deck with just a single ramp under each axle. Heavy vehicles may require two ramps to spread the weight across a longer loading area. This is where ramp stands and pins come in handy.
How much do trailer ramps weigh?
30″ ramp = 6 pounds per foot. 26″ ramp = 6 pounds per foot. 22” ramp = 5 pounds per foot. 12″ ramp = 4 pounds per foot.
What is the difference between step deck and flatbed?
The main difference between the flatbed trailer and the step deck, or double-drop flatbed trailers is the maximum height of the cargo that can be transported. But the step deck, with its lowered deck gives you the means to haul slightly taller cargo while keeping the transportation logistics to a minimum.
How long is drop deck trailers?
For one, a drop deck trailer can’t be more than 8.5 feet wide. The trailer can’t extend past 48 to 53 feet long, and the load can’t be more than 10 feet high. Many also have a maximum weight of 48,000 pounds.
How high off the ground is a step deck trailer?
A typical flatbed trailer is 5 feet above the ground, meaning freight cannot exceed 8 feet 6 inches in height. Step deck trailers typically have a lower deck height of 3 feet 6 inches, meaning freight cannot exceed 10 feet in height.
How much weight can aluminum ramps hold?
Solid Ramps As a general rule of thumb, most pre-assembled ramps are made to handle 300 lbs. per axle. A ramp that is made with aluminum will require support built underneath the ramp itself to accommodate heavy weight.
How big is a step deck trailer ramp?
These 8′ L step deck trailer ramps are part of a versatile ramp system for loading tractors, loaders, trucks, and heavy equipment onto step deck trailers, loading docks, or flatbed trailers. Manufactured from high-strength, lightweight aluminum, this pair of ramps is easy to set up and can support up to 20,000 pounds per axle.
How to call landsport aluminum step deck ramps?
Give us a call at 1-877-687-RAMP (7267) Copyright © 2016 by Advanced Aluminum Structures, Inc. LANDSPORT is a trademark of AASI. All content on this website is copyrighted and owned or licensed by AASI.
What can a trailer loading ramp be used for?
Trailer loading ramps empower drivers to easily transition cargo between the high and low platforms on their step-trailer. Portable ramps can also be used to load heavy cargo from the ground, or they can be converted into load levelers by turning them on their side and securing them to the lower platform.
What do I need to set up a step deck load leveler?
Accessories such as stake pocket inserts, hanger brackets and ramp stand stands all make it simple to set up, store and support your ramp/load levelers. Read about the individual components and kits we offer in our Step Deck Trailer Load Levelers and Ramp Kits Buying Guide, and contact us with any questions.
