When did they stop making hardboard siding?

When did they stop making hardboard siding?

This stipulated that owners of properties constructed using hardboard siding from January 1, 1980 through January 15, 1998, depending on the manufacturer, could be reimbursed for any damages caused by the product. Following this, nearly all manufacturers stopped producing Masonite siding.

Is hardboard siding bad?

Improperly installed hardboard siding can undergo serious deterioration including buckling, rotting, softening, blistering, severe swelling, mildew, and insect infestation. Water passes through improperly caulked joints, sunken nail holes and the cut edges that are located near the ground.

Is hardboard siding still available?

It’s currently still available as “hardboard” although most people still refer to it as masonite. Regardless of what it’s called, the material has many common problems that often lead to its replacement.

What is the major cause of hardboard siding deterioration?

The most pressing issue (pun intended) with hardboard is that it naturally absorbs water. Once water is absorbed by the siding, it loses durability and deterioration begins. Signs of water absorption and deterioration are board swelling, warping, buckling, blistering, rotting and softening.

What can I replace hardboard siding with?

If you have this problem, you might want to consider replacing the rotten courses of hardboard siding with more durable fiber cement siding. Fiber cement siding is available in the same look and dimensions as hardboard siding but is more resistant to water damage.

How long does hardboard siding last?

So if you purchase an old house with hardboard siding, it may not be as bad as all the horror stories you might hear. I can state for a fact that some hardboard siding will last at least 40 years with proper preparation, installation, and maintenance — and I have the evidence to prove it.

Is hardboard siding the same as hardiplank?

Hardie Board, by the way, is not the same product as “hardboard,” which is a dense and thin pressed particleboard typically made from wood. Hardie Board is a fiber cement product known available as a horizontal lap siding called HardiePlank®, and a vertical siding called HardiePanel®.

How do you repair hardboard siding?

Sand down the cracked area and apply a flexible, all-purpose exterior vinyl spackling compound, using a putty knife. Smooth the patch before it hardens. Allow it to dry, lightly sand the patched area, and finish it to match your siding.

Can you pressure wash hardboard siding?

Pressure washing works on wood, vinyl, aluminum siding and masonry, but due to its high pressure, we don’t recommend it for hardboard siding. Hardboard is more vulnerable to moisture than wood and it’s extremely difficult to repair if you accidentally gouge it. Pressure washing won’t stop mildew.

Can hardboard get wet?

The hardboard is susceptible to water which can cause expansion and damage. Waterproofing the material prevents the potential damage from water due to rain, soaking or any other potential situation where the board gets wet.

Can you paint hardboard siding?

Hardboard siding is not ideal for paint adhesion and requires multiple coats of primer to help prevent future paint failure. In addition, because hardboard siding is smooth, you will need to employ a specific application strategy to help prevent unattractive roller marks in the final finish coat.

When was the last time lap siding was recalled?

The last date for filing claims under the settlement was August 18, 1998. Stimson Brand Hardboard Siding (Forestex): This company no longer manufactures or markets lap siding. They continue to produce a hardboard panel surfaced with tempered hardboard marketed as Duratemp.

Where do I Mail my siding recall claim?

Mail your claim to 520 S.W. Yamhill, Suite 325, Portland, Oregon, 97204-1319; Remember to send a few photos of your siding with your claim letter. Claims information can be found at www.abtcoclaims.com. Smurfit Paper Company a subsidiary of The Jefferson Smurfit Corporation: Cladwood hardboard siding

When was the last forestex hardboard siding failure?

Forestex Hardboard Siding Failures & Claims: Contact Stimson Corporation, 520 S.W. Yamhill, Suite 325, Portland, Oregon, 97204-1319. Georgia Pacific Hardboard Siding Failures & Claim s: last date for filing claims under the settlement was August 18, 1998. Brands included Cadence siding and Sundance hardboard siding.

Is there a class action lawsuit for James Hardie siding?

The siding is known informally among consumers and builders as “HardiBoard.” Property owners who experienced problems with James Hardie fiber cement siding may be able to participate in a class action lawsuit to recover compensation for repair costs and other damages.