How do you reset the cluster?
How do you reset the cluster?
Push and release the Sel/reset button button 3 times repeatedly. The instrument cluster begins its self-test. Each successive press of the Sel/reset button initiates a new cycling of all the gauges. To end, turn the ignition switch to OFF, or vehicle speed exceeds 1.5 mph.
Why is my Chrysler Town and Country not starting?
No gauges or digital mileage displays, the ABS, and Alarm Set would be lit. Sometimes I couldn’t enter the van with the remote xmitter when the engine was running during this condition. Sometimes the van would fail to start as well. Heard this is an issue with a solder joint on the back of the cluster.
Where to reset the computer on a Chrysler Town and Country?
Make sure you reset the computer only after you have finished repairing or servicing the car or you may risk damaging the computer. Locate the OBD port, which is the same size and shape as the scan tool’s connective end; the port can be found on the underside of the driver’s-side dash next to the steering column.
How did I Fix my Chrysler instrument cluster?
I got this fixed on the 1999 by having a very good mechanic that knew of this problem (chrysler/dodge dealers in this area seemed to have never heard of it-though it seems to be quite a wide-spread issue)-the mechanic shop removed instrument cluster and re-soldered one connection in the middle of the cluster.
What are the signs of an instrument cluster failure?
Instrument lights come on, tach, odom, and fuel gauge doesn’t work and windshield wipers come on. Instrument Cluster head lights & turn signal. Flashing then cluster went dead & no turn signals still runs . My speedometer, gas gauge, mileage and tachometer stopped working.
No gauges or digital mileage displays, the ABS, and Alarm Set would be lit. Sometimes I couldn’t enter the van with the remote xmitter when the engine was running during this condition. Sometimes the van would fail to start as well. Heard this is an issue with a solder joint on the back of the cluster.
Make sure you reset the computer only after you have finished repairing or servicing the car or you may risk damaging the computer. Locate the OBD port, which is the same size and shape as the scan tool’s connective end; the port can be found on the underside of the driver’s-side dash next to the steering column.
I got this fixed on the 1999 by having a very good mechanic that knew of this problem (chrysler/dodge dealers in this area seemed to have never heard of it-though it seems to be quite a wide-spread issue)-the mechanic shop removed instrument cluster and re-soldered one connection in the middle of the cluster.
Instrument lights come on, tach, odom, and fuel gauge doesn’t work and windshield wipers come on. Instrument Cluster head lights & turn signal. Flashing then cluster went dead & no turn signals still runs . My speedometer, gas gauge, mileage and tachometer stopped working.
