Is there a cruise control on a 2005 Chevy Silverado?

This 2005 Chevrolet Silverado came in with the complaint that it did not have cruise control. The customer, whom I have known for a long time, asked if I thought cruise control could be added to his truck.

Where is the connector for the cruise control?

The first thing that I looked for a was the four wire connector that is used to attach the cruise control portion of the multifunction switch to the vehicle wiring. It was not there. If you were to inspect and find that connector. Then all you should have to do is install a new multifunction switch with the cruise control option.

When do you need a screwdriver for cruise control?

Sometimes a screwdriver is needed for leverage. The first thing that I looked for a was the four wire connector that is used to attach the cruise control portion of the multifunction switch to the vehicle wiring. It was not there. If you were to inspect and find that connector.

How does a drive by wire cruise control system work?

Drive-by-Wire or electronic throttle actuator has changed the way cruise control systems operate. With DBW or ETA systems, an actual motor controls the throttle opening. Shown here are some of the circuits that now handle the operation of the cruise control system. Learn about the respective current paths, circuits, data line, networks and more.

Where is the cruise control switch on a Chevy Silverado?

This switch is located on the brake pedal assembly and allows current to flow to the cruise control module to signal cruise deactivation. To test the switch, use a digital multi-meter set to ohms and read the resistance between terminals “A” and “B.” Resistance should be less than or at 0.3 ohms. Figure 2. A diagram of the stoplamp switch.

What to do if your Cruise Control is not working?

A diagram of the stoplamp switch. This switch can be found on the steering wheel, although some switches can be found on the dashboard. If only one setting on your cruise control does not work, chances are high that the switch is the problem. Test the switch the same way the brake switch is tested.

How do you replace a cruise control cable?

Step 3: Disconnect the vehicle’s battery. Although you most likely won’t be removing anything electric, it’s always a good idea to remove the vehicle’s battery cables before starting the job. Locate the vehicle’s battery and disconnect the positive and negative battery cables before proceeding. Step 4: Remove vehicle’s engine cover.

What causes a cruise control cable to fail?

The cruise control cable can come into contact with hot exhaust or intake manifolds, causing the cable to fail. Step 2: Prepare the vehicle. Make sure you have the vehicle located on a flat surface, minimizing the potential for rolling while you’re under the hood.

How does the cruise control work in a car?

Speed sensors inside the transmission then relay information through the vehicle’s ECM and additional throttle is engaged or released based on the vehicle’s speed, navigating hills or different driving conditions.

How is the cruise control cable attached to the servo?

Once the servo is removed, there are two clips that attach the cruise control cable to the servo. Using a small flat blade screwdriver, lift the two clips and pull the cruise control cable by the head (not the wire as it may strip).

Can you put cruise control on a V6?

4.8/5.3 – not to sure. might have to go after market. v6s are cable, whereas v8s are drive by wire. yes you can.. if its a v8 then its really simple, just add the stalk and enjoy.

Do you need cruise control on the stalk?

Click to expand… yes the stalk will add cruise and you’ll get a green indicator light when the cruise is activated. dont you need a cruise control module? the brain that is between the stalk and the throttle drive by wire??

Are there any aftermarket cruise control kits available?

Offering factory upgrade cruise control kits for many vehicles as well as aftermarket cruise control kits for 99% of all domestic and Japanese/Korean models. Everything on our site is in stock and in most cases, will ship the same day or within one business day.

4.8/5.3 – not to sure. might have to go after market. v6s are cable, whereas v8s are drive by wire. yes you can.. if its a v8 then its really simple, just add the stalk and enjoy.

Where is the cruise control sensor on a Chevy Silverado?

It relays a varying voltage to the powertrain control module that is displayed on the instrument cluster as vehicle speed and RPM. The sensor is located on the transmission on rear wheel drive trucks and on the transfer case on four wheel drive trucks.

Where is the cruise control fuse on a Chevy Silverado?

A good fuse (on the left) compared to blown fuses (on the right). This switch is located on the brake pedal assembly and allows current to flow to the cruise control module to signal cruise deactivation.

Is the cruise control on my Silverado HD working?

Silverado 2011 cruise control not working but cruise control… Cruise control not working on chevy silverado 2500 HD with hydraulic braking. Just purchased the truck. … read more Vocational, Technical or Tra… Program Coordinator/Profe… I have a 2012 silverado with a brake controller. The cruise

What kind of cruise control does a 1992 Chevy 1500 have?

I have a 1992 Chevrolet 1500 Silverado P/U and I can not get the cruise control to work. It was working fine and just stopped working. I have replaced the cruise control module, the clutch switch, rel … read more

Is the Chevy Silverado equipped with super cruise?

It does not have the ability to steer the vehicle, which is included in Super Cruise – its semi-autonomous Level 2 driving assistant. GM is widely expected to offer Super Cruise on the Chevrolet Silverado for either the 2022 or 2023 model years.

Can you repair a 2005 Chevy Silverado SUV?

Although this repair article is about a 2005 Chevrolet Silverado it applies to many GM full sized trucks and SUV’s. Please see the full list at the end of the article. I worked with The Electric Connection to create this kit which includes a new ACDelco original equipment switch, a custom wiring harness and a connector pin out identification chart.

What is the Body Control Module ( BCM ) in a car?

You’ve probably never thought about the body control module (BCM) in your car, but this component plays an important and comprehensive role in how the electrical features of your vehicle operate. Since the BCM touches on so many different systems, it’s not always obvious when things start to go awry.

Are there any GMC or Chevy cruise control kits?

The Cruise Control Store is proud to offer Chevrolet, Buick, and GMC cruise control kits. Chevrolet, commonly referred to as Chevy, has been around since 1911, and is known for a number of different models including the Impala, Corvette, Camaro, Tahoe, Silverado, and more. Buick was founded in 1903 and currently sells…

Is it possible to install cruise control on a base car?

Wire is done through computer, so stalk tells computer to hold tps in X location. For some reason you think this is a big conspiracy, but it really is that easy. Took the stalk out of mine and threw it on one of our w/ts after reading about the V8s and it worked perfectly.