How do I reset my Maytag error code?

How do I reset my Maytag error code?

How do I clear the error code on my Maytag washer? To clear the error code on your washing machine, you have to press the pause/ cancel button twice and the power button once. If still, code is displayed, unplug the machine for a minute.

How do I fix the LR code on my Maytag Neptune washer?

How do I Fix Maytag Washer Error Code LR?

1. Unplug the drain hoses and check for plugs or possible obstructions.
2. Straighten all drain hoses to eliminate kinks and ensure that they are tightly reconnected.
3. Clean and check the screens on the inlet hoses at the faucets for possible obstructions.

How do I reset my Maytag front load washer?

You also can reset the washer if you want to cancel a setting you chose.

1. Press the “Power/Cancel” button. Video of the Day.
2. Push the appropriate button to choose a new cycle.
3. Press “Start/Pause.” You have now reset your Maytag washer. resources. CNET: Washer Buying Guide. Chad Buleen. PEOPLE ARE READING.

Does code on Maytag Neptune washer?

Door Troubles When the door is not shut completely, the washer does not operate. Code “dL” means the door is unlocked, so power down the washer, tightly close the door and restart the cycle. The simpler “dS” indicates the door has opened during operation.

How do you reset a front load washer?

How to reset the washing machine:

1. Press POWER to turn the washer off.
2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
4. Plug the washer back in, or turn the circuit breaker back on.

What does LR mean on my Maytag Neptune washer?

locked rotor
The LR code means “locked rotor” which is just a way of saying the control is not seeing the motor turning. The image below contains the wiring diagram for this washer as you requested but there are some other things to consider. Usually when the LR code is displayed the motor has stopped turning for some reason.

How do you reset a Maytag Neptune washer?

How to Reset a Maytag MAH8700AWW Washer

1. Turn off and unplug the washer. Wait 30 seconds.
2. Reconnect it and press the “Power” button. This resets the unit.
3. Continue regular use of the washer. If resetting does not resolve your issue, you may need to call a professional.

How do you unlock a Maytag front load washer?

Maytag Front Load washer door locked at install

1. The door may immediately unlock.
2. The door lock LED light will blink. The door should unlock after 60 seconds.
3. The washer will go into a hold and drain routine for 8 minutes. After 8 minutes the door will unlock.

How do I reset my Maytag Neptune washer?

A power surge or other malfunction may make it necessary to reset the washer, which is simple to do.

1. Turn off and unplug the washer. Wait 30 seconds.
2. Reconnect it and press the “Power” button. This resets the unit.
3. Continue regular use of the washer.

What are some Maytag washer error codes?

Error Codes on Maytag Washers Sd/Sud. To alert you that there are excess suds in the machine, Maytag’s Bravos line of washers show an “Sd” code, while the Maxima models show an “Sud” code. oL. Maytag’s Bravos washers will display an “oL” error code to indicate that the machine is overloaded. uL. LF/Ld. HC. dL/lid/dU. dEt. F08, E01. F09, E01. F05, E02.

What do Maytag dryer error codes mean?

An “AF” error code in your Maytag dryer’s display indicates that the appliance is suffering from low airflow. In most cases, the airflow is reduced due to a clogged vent or lint screen. In addition, the vent may be kinked or bent so air has difficulty reaching the dryer.

What does Maytag dryer code F01 mean?

Maytag dryer error code f01. This error code indicates a serious problem, which is not a DIY one at all. It means that the main relay control board is down and, most likely, needs to be replaced. It will take a bit of research, because you will need the full model number. It is printed on a sticker inside the door way.