Where can I get a new serpentine belt for my Chrysler?
Where can I get a new serpentine belt for my Chrysler?
An updated engine bracket and pulley assembly is available at your local Chrysler parts department. This job is not highly technical, but is time-consuming. You will have to take a lot of stuff off to gain access to the engine brackets retaining bolts. This may not be a very good driveway or do-it-yourself auto repair.
Why does my serpentine belt keep popping off?
Plus, an important tip for removing some pain when doing the job. The Chrysler Town and Country, Dodge Caravan and Voyager have a tendency to throw the serpentine belt after driving through a puddle. In my opinion this problem is not limited to minivans. If you have a V6 in a Chrysler product this kit is the solution for the belt popping off.
Is there a enhancement kit for the serpentine belt?
Included is the belt diagram and details about the enhancement kit now available. I’m also including information from a technical bulletin showing how the dealers were fixing this issue.
Why does my Dodge Caravan throw the serpentine belt?
The Chrysler Town and Country, Dodge Caravan and Voyager have a tendency to throw the serpentine belt after driving through a puddle. In my opinion this problem is not limited to minivans.
An updated engine bracket and pulley assembly is available at your local Chrysler parts department. This job is not highly technical, but is time-consuming. You will have to take a lot of stuff off to gain access to the engine brackets retaining bolts. This may not be a very good driveway or do-it-yourself auto repair.
Plus, an important tip for removing some pain when doing the job. The Chrysler Town and Country, Dodge Caravan and Voyager have a tendency to throw the serpentine belt after driving through a puddle. In my opinion this problem is not limited to minivans. If you have a V6 in a Chrysler product this kit is the solution for the belt popping off.
The Chrysler Town and Country, Dodge Caravan and Voyager have a tendency to throw the serpentine belt after driving through a puddle. In my opinion this problem is not limited to minivans.
Included is the belt diagram and details about the enhancement kit now available. I’m also including information from a technical bulletin showing how the dealers were fixing this issue.
What kind of engine does Chrysler Town and Country have?
However, my neighbor has a Chrysler Town and Country SE with a 3.8 L engine. We live in Florida and experience extremely heavy rains and some minor flooding in our area during rainy season. Every time my neighbor’s minivan would go through a deep puddle it would take off the engine belt.
How to replace serpentine belt replacement Grand Caravan Town?
If playback doesn’t begin shortly, try restarting your device. An error occurred. Please try again later. (Playback ID: y-HkyP9D59jOvBEQ)
Where do you find the serpentine belt on a Chrysler Town and Country?
Check your owner’s documentation for specific information on your model year and engine type. Open the hood and find the belt tensioner pulley. This pulley has a bolt in its center that will allow you to release tension on the belt. You’ll see the belt running around the tensioner pulley as well as the crankshaft and alternator.
How much does it cost to replace a Chrysler serpentine belt?
Chrysler Town & Country Serpentine/Drive Belt Replacement at your home or office. Chrysler Town & Country Serpentine/Drive Belt Replacement costs $130 on average. Following is a breakdown of the labor and parts estimates. What is a serpentine belt and how does it work?
How do you change the drive belt on a Chrysler Town and Country?
The drive belt setups for a Chrysler Town and Country may also vary by model year. Check your owner’s documentation for specific information on your model year and engine type. Open the hood and find the belt tensioner pulley. This pulley has a bolt in its center that will allow you to release tension on the belt.
However, my neighbor has a Chrysler Town and Country SE with a 3.8 L engine. We live in Florida and experience extremely heavy rains and some minor flooding in our area during rainy season. Every time my neighbor’s minivan would go through a deep puddle it would take off the engine belt.
If playback doesn’t begin shortly, try restarting your device. An error occurred. Please try again later. (Playback ID: y-HkyP9D59jOvBEQ)
Can a new belly pan be installed on a gates drive belt?
The small splash shield underneath doesn’t divert the water that well. Nevertheless, a new belly pan is not part of the technical service bulletin. Gates drive belts came up with an Enhancement Solution Kit (available from Amazon) that is easier to install then following the repair bulletin from Chrysler.
The small splash shield underneath doesn’t divert the water that well. Nevertheless, a new belly pan is not part of the technical service bulletin. Gates drive belts came up with an Enhancement Solution Kit (available from Amazon) that is easier to install then following the repair bulletin from Chrysler.
Where are the pulleys on a serpentine belt?
The serpentine belt weaves over and under the various engine devices (power steering pump, water pump, alternator, along with the idler and tensioner pulleys). Many vehicles have belt routing diagrams under the hood or in the owner’s manual. Make sure you find it and verify the routing before removing the old belt.
How do you remove a serpentine belt on a car?
To remove the belt use a belt tensioner tool, if you have access to one, to release the tension. You can also put the 15mm wrench on the tensioner pulley bolt and rotate it clockwise.
How can I increase the tension on my serpentine belt?
Increase the tension on the belt. If your vehicle does not have an auto tensioner, insert a pry bar or piece of wood between the alternator and the engine. Run the belt over the alternator pulley, then use the bar to pry the alternator away from the engine and increase the tension on the belt.
What do I do if my belt pops off in my minivan?
If you have a V6 in a Chrysler product this kit is the solution for the belt popping off. It can also get rid of that annoying squeak noise at low rpm. I say any vehicle, because the kit is advertised for minivan owners only.
